Easyryder in closet. First grow!

Hail, fellow growers!

For a long time now I've been thinking of growing a nice little lowryder or easyryder in my closet. Now the time has come! I've already started the grow, so without further ado, here's how it's been so far!

First I ordered 3 femenized lowryder seeds online and waited eagerly. I got them about a week later, and by that time I had ordered lightbulbs as well.

Christmas came and went, and after it I bought all the necessary items I needed to start building! Here's the final product.

http://i1193.photobucket.com/albums/...m/DSC_3526.jpg

Sure, it might look a bit untidy, but that's just to get the plant closer to the lights now that it's so small. The "box" is equipped with one 120mm fan in the front, and one in the back. Just like a computer, so that the airflow will be good. There's also mylar on all the walls to reflect as much light as possible.

To show how the light system is, I made a horrible looking sketch in MSpaint. Have a look-see!

http://i1193.photobucket.com/albums/...tonium/box.jpg

The plate that holds the lamps are hung up with cord to the top of the closet, so that I can lift and lower it according to plant height.


It was time to germinate the seed. I put the seed in some moist paper towel for two or three days, and the seed started sprouting!

So with the timer set to 18 hours light and 6 hours dark, and with another fan inside the box to substitute wind, I was ready to plant!

I went ahead and filled up a small pot with some nice Light-Mix from Biobizz. After that, I planted the seed, and watered it gently with tap water.

After about 2 days I was happy to see that the seed was beginning to become a plant!

http://i1193.photobucket.com/albums/...m/DSC_3529.jpg

The air was and is very, very dry here, so I put in 4 glasses of water, which raised the air humidity to about 25%. Not very much, but it will have to do, as I can't afford buying a humidifier.

The temperature was good though, staying at about 27-30 degrees celcius.

Because of the dry air, the soil quickly became dry, and so I watered it again, this time regulating the PH to about 5.5 using lemon juice!

Two days went by, and my little girl had become a nice little plant.

http://i1193.photobucket.com/albums/...m/DSC_3531.jpg


Today is day 5, and it's looking really healthy! It got a deep green color, and it's full of small hairs. No yellowing of leaves or any of that creepy stuff.

http://i1193.photobucket.com/albums/...m/DSC_3541.jpg


In a couple of days, or maybe even tomorrow, I will start using nutrients provided by Biobizz. It's time for it to start getting some real food! Organic, of course.

I'll upload another picture in a couple of days, so you guys can see how it looks, so stay tuned!

lookin very interestin pilgrem be pullin up a stump and gazin a eye apone yur rig be seein how yu do. Good luck and happy growin to yu friend.

BWD

Good beginning with a very nice baby there. Hope you can ride easy. :thumbsup:

Another couple of days have passed. It turned out that it was the large wind-fan that made the soil dry out so quickly. I had it turned off for a day. Today I fed it it's first nutrients, and hope it will like it's food. Here's a picture!

http://i1193.photobucket.com/albums/...SC_3543fix.jpg

Looks good so far. Nice job on the box, should suit all your needs just fine.:thumbsup::thumbsup:

Only question I got is, why are you pHing your water down to 5.5? 6.5-7.0 is usually the range you want to shoot for growing in soil, but like I said looks good so far. My brother grows lowryder #2 quite often, so I'll be curious the differences between the two as yours start to get older.

Interesting, I've always heard you should have it at 5.5-6. It says so on my PH-kit as well. I guess I'll have to check this up.

I believe that number is for Hydro/Aero setups;)

Quote:

---

Originally Posted by Quantonium

Sure, it might look a bit untidy, but that's just to get the plant closer to the lights now that it's so small. The "box" is equipped with one 120mm fan in the front, and one in the back. Just like a computer, so that the airflow will be good. There's also mylar on all the walls to reflect as much light as possible.

---

Looks very nice to me and not untidy at all mate! :thumbsup: I'm a new grower too, (we're using the same soil btw :)) but I'm a veteran when it comes to building computers and if the same principles apply then I would add a second exhaust fan or at least make sure the exhaust one is of a bigger CFM capacity in order to maintain negative pressure inside the box. Also work out the volume of the box in cubic ft and make sure the exhaust is able to empty all the air in under 5 mins.

Quote:

---

Originally Posted by Quantonium

Interesting, I've always heard you should have it at 5.5-6. It says so on my PH-kit as well. I guess I'll have to check this up.

---

That's for hydro (most pH test kits are made for water anyway) and I bet your pH-kit manufacturer didn't have cannabis in mind anyway lol! :p MJ thrives in between 6.3-6.8 pH when in soil to avoid nutrient lockout. Check out this chart:

http://www.gardenscure.com/420/attac...1&d=1186314471

This basically shows the availability of nutrients in various pH ranges, so the optimal would be to keep a constant pH of 6.5 they way I see it. If I do understand the chart correctly that is.
Your baby looks great btw keep up the good work. New growers unite!!!
:joint1:

Thanks for all the nice tips! About the fans, it sounds logical what you say, and I might do such a thing in the future, but for now, I'm not sure if I'll do that. It makes a lot of noise as it is, and I'd had to mod the electricity system again, which was creepy enough the first time. :P We'll see though, it's good to know of nonetheless.

Cool to see that chart! I will definitely try having my ph at that level from now on. I do have a problem though. My nutrients make the water brown, and I would believe that affects the color of the PH tested water, no? My PH kit is basically a small vial where i put a little water in, and a few drops of a solution. Then check the color of the water on a chart. If it is already brown to begin with, wouldn't that make it look more acidic on the chart?

Yes that is the problem with the liquid tests kits. I'm still currently using the same setup, but plan on buying an electronic pH testing pen(much more accurate if calibrated often). I've been using the liquid for awhile now and I've found that I can tell pretty accurately by watching the instant the drops hit the water before it dissolves into the water. However a pH pen is the way to go.:thumbsup::thumbsup:

Some days have passed and the plant seems to be having a good time. The leaves droop a little, especially during the late hours, and night, but they still feel firm and strong to the touch. It's got a single yellow spot, but other than that it seems to be growing a lot!

I've received an email from Biobizz telling me that their nutrients apparently doesn't do anything to PH, so I'll be following a feeding schedule they've got, and keep the PH at 6.5. Oh, and I also bought a syringe for measuring exact ML.

http://i1193.photobucket.com/albums/...m/DSC_3544.jpg

Some days have passed, and the cannabis is looking relatively good, but it has some problems..

Keep in mind that the camera boosts colors, so the yellow part isnt actually that yellow. Most of the leaves are quite green and vibrant. Oh, and this was taken 45 minutes after the lights was off, so it's usually more upright than this.

http://i1193.photobucket.com/albums/...m/DSC_3548.jpg

What can this be? It doesn't look urgent, so I'm guessing it has something to do with the nutrient uptake. Can't be too much, because this isn't nutrient burn.