Hanna 4-1 tester the cheapest I seen

[Weed4Life]

http://sunstoneherbals.com/hanna_combo_ph_ec_tds_temp_waterproof_tester_hi981 29.htm


This is for anyone looking for a good and affordable tester. I will be buying one in about month or so. So if anyone out there is using this combo, post your praises or complaints about this item.

Weed

[Zandor]

That is a good price for sure. I have several of that same model and I recommend it to others. Don't forget to get the calibration solution you will need them all on hand.

Very good choice.

[Weed4Life]

Yeah the calibration solutions(4.01,7.01,10.1) are included FREE through this company. Do you feel this is a great deal and perfect for a newbie to hydro?

W E E D 4 L I F E

[Zandor]

Yeah the calibration solutions(4.01,7.01,10.1) are included FREE through this company. Do you feel this is a great deal and perfect for a newbie to hydro?

W E E D 4 L I F E

You should have the 4.01, 7.01 and then one for the TDS calibration 1413uS/cm. You can use the 4.01 as storage solution.

There is no need for the 10.01 solution the unit is designed to work with the 2 point set 4.01 & 7.01 for the Ph calibration.

Yes it is a very good price for that unit.

[mistyganjatree]

all my meters are hanna, ive used them for yrs, i have an EC meter of theres for over two yrs and still good, youll need to buy a 250 ml bottle of both buffers PH and another for the EC , check them at leat once a week, and everytime they recieve a knock! i have noticed the price dropping over the last two yrs or so. the cheaoest model used to cost 120 euros !, the PH meter electrodes always go quicker so i like the spare to go with it ! very good choice, although i do prefere to keep my EC and PH meters seperate for practical reasons[ if one breacks i still have the other parameter to use! and dont loose all control]

welcome to the world of endless possibilities,,, hydroponics!

[LadyIgnite]

I just ordered the Hanna meter from Sunstone.. will keep you posted on the arrival!!

LadyIgnite :D

[Tommygirl]

I saw one of those exact models on ebay for $100US. I couldn't afford it and had to settle for just a ph meter and a in/out thermometer, but I wanted it so bad I could practically taste it.:o

[GodBud]

You should have the 4.01, 7.01 and then one for the TDS calibration 1413uS/cm. You can use the 4.01 as storage solution.

There is no need for the 10.01 solution the unit is designed to work with the 2 point set 4.01 & 7.01 for the Ph calibration.

Yes it is a very good price for that unit.

Zan,

I bought the Hanna HI 991404 unit got it for 120 bones brand new. What do you think about this meter http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280058119425

It came with the 4.01 and 7.01 and the 1413 solutions. What do you mean using the 4.01 as a storage solution and what do you mean when you say the unit is designed to work with the 2 point set 4.01 & 7.01 for the Ph calibration. Sorry nube here.

One more thing both the probes on the unit are designed in line if you want to do it that way. This seems a lot more sturdy to do it this way than just mounting the meter to where the probes are just dandling. That proposes a design problem with my res as far as mounting the meter. However if I had the probes in line that just seems more practical but I dont know of any fittings to accomodate both probes and an outlet to distribute my nutes to the irrigation system. Any ideas.

Thanks bro

later

[doco]

Hey Weed4Life, thanks for the heads up on that good deal - at least $35 cheaper than anywhere else that I could find. Mine arrived today. :thumbsup: