PDA

View Full Version : MYLAR PASTED TO DRYWALL?



Blue53
06-10-2006, 05:00 PM
1. HAS ANYONE PASTED MYLAR TO DRYWALL, YA KNOW LIKE PASTING WALLPAPER?

2. THIS MY SECOND CABINET, SHOULD I USE DRYWALL OR PLYWOOD OR ANY OTHER SUGGESTIONS?

THANKS, BLUE

Nutzz
06-10-2006, 06:29 PM
I used loctite brand construtction adhesive to glue to MDF. Sold in home depot/lowes in the paint dept

InhaleItALL
06-10-2006, 07:39 PM
ok, this is probably a stupid question, but as I have never grown, I am curious what the heck the purpose of this is, the mylar etc... Please excuse my ignorance.

Nutzz
06-10-2006, 09:19 PM
mylar is reflective, more so than white paint.

the image reaper
06-10-2006, 10:23 PM
personally, I would NOT use drywall behind your Mylar ... I was going to do that too, but then I remembered how sensitive drywall can be about moisture and humidity ... plus, then the mildew gets ahold ... I wound up using fairly cheap waferboard, a plywood-type material (avoid particle board, as it really sucks when wet, too) ...
glue doesnt work worth a damn on Mylar, so I just tore off small pieces of white duct-tape, and stapled thru that ... :smokin:

Nutzz
06-11-2006, 05:29 PM
Use the plywood if cost is an issue. The loctite bonds to anything including MDF and mylar.

greenboard is ideal for bathrooms, kitchens and basements. handles moisture better than the standard gypsum drywall but if you plan to get it wet, you should use concrete backerboard which is what they use behind tile in bathrooms and kitchens.

the image reaper
06-11-2006, 06:33 PM
great ! thanks for the glue tip :thumbsup: ... I tried several different glues not long ago, with no luck ... wish I would have known about the Loctite glue ... :smokin:

Opie Yutts
06-12-2006, 01:08 AM
I used spray glue to hang my mylar. It was very handy and works great. It has been hanging on both drywall and particle board for about 3 years now with no problem. Of couse plywood is a better choice if you plan on spilling water on it, but plywood is more expensive than particle board. If you really want to go all out use marine grade plywood, but why bother with that on walls? Maybe on something more likely to get wet.

Opie Yutts
06-12-2006, 01:10 AM
Oh yeah, I also use contact adhiesive. I'm not talking about the grade school kind, but the professional kind used bond laminate to counter tops. This too works great, but is not as easy as spray glue. Both are at Home Depot.

Blue53
06-12-2006, 01:33 AM
Thanks everyone for your advice! It really Helps!!!

Blue:thumbsup:

cmorbud
06-14-2006, 03:15 AM
the spray glue works great.
woulndent worry about the dry wall to much. it will be fine.

Zandor
06-14-2006, 04:31 PM
I used the 3M brand of spray glue and I also have drywall on the walls too. No problems with mold either.

Login Failed
06-15-2006, 04:47 AM
Say you want to move...just rip that Mylar off the wall and use a textured paint to cover up the glued areas. Also found at the HD.

WillysWonder
08-03-2006, 07:52 PM
I found Hot glue to work well for hanging mylar!

Tokudai
08-04-2006, 06:44 AM
a staplegun worked great last time I used mylar. I plan on using flat white paint or foylon this time

slowthestone
08-04-2006, 11:32 AM
Mount the mylar on heavy card stock or poster board. Then nail, tack, staple, etc...that onto your wall. Better to overlap pieces too instead of butting them together...makes for a better seam.

Thats how it is a friend's...to date...no problems with mold.