here is my closet so far

[spankey]

hereare some pictures of my closet so far.

i have emergency blankets on the walls, my hood is made of pririty mail boxes made reflective with silver shinny duck tape. i have 12 26 wat 6500k cfls and 2 23 wat 2700k cfls. (those are the energy saving wats they say replaces 100 wat bulbs)

[attachment=o120095]


[attachment=o120096]


[attachment=o120097]

spankey Reviewed by spankey on 02-18-2007. here is my closet so far hereare some pictures of my closet so far. i have emergency blankets on the walls, my hood is made of pririty mail boxes made reflective with silver shinny duck tape. i have 12 26 wat 6500k cfls and 2 23 wat 2700k cfls. (those are the energy saving wats they say replaces 100 wat bulbs) Rating: 5

[spankey]

so what everyone think so far

the closet measures 24" X 40" X 6'

i am going to grow 2 plants using the dirt dwc method zandor talked about in the grow report 8.

i am either going to use foxfarm 3 part or gh flora series 3 part. have not yet decided

i will be putting reflective material on the door and the floor

any sugestions or comments greatly apreciated.

am i missing anything?

[hemp69]

all i can say is i wish i had a closet like that haha
im going to set one up soon and thats what i was planning on mine looking like.
nicee/

[spankey]

ya i designed my light hood and to get the most out of the 12 bulbs i am now trying to design the flower hood to hold 24 or more of the 2700k spectrum bulb scince i can get them for the price of 1.99 for 4 they are 23 wat energy saving bulbs.

[bud luv]

Looks good, use as many lights as possible.

Are you planning on doing hydro in those buckets?

good luck in there. :rasta:

[spankey]

no these are the bottom buckets 1 have 3 more 5 gal buckets

the 3 inner buckets have 1/4 holes drilled from 1/2 inch up from the bottom 2 the 10" mark from the bottom i have them spaced about 3/8" to 1/2" apart all around. in the bottom of the bucket i have drilled 1/8" holes spaced about 3/8" apart.(it has around 150 to 200 holes) in that i am putting a 6" air stone then putting in 1/3 of my potting mix(50% general potting soil with 50 perlite) the putting another 6" air stone then another 1/3 of the mix then 1/4 inch construction sand then potting my clone with the remaining 1/3 mix the top with 1/4" construction sand. the bottom buckets each have 2 6 inch air stones that sit in the nutrient solution after each watering. oh ya i have a 6" net pot under the inner bucket for space and to hole the 2 airstones down.

i got this idea from zandor off of the grow report #8. everyone if you dont dl his grow reports yet you are really missing some great shit. this is probably one of the best dirt designs i have ever seen.

[spankey]

bump just want people to help make it better tell me how my set up is looking.

[Shovelhandle]

It does look very good.
Lots of work there, plug it in and plant some seeds!

See you in the Grow Log Threads.

Shovelhandle

[spankey]

It does look very good.
Lots of work there, plug it in and plant some seeds!

See you in the Grow Log Threads.

Shovelhandle

still got to buy my dirt and 1 airpump but im not doing seeds this round a friend is going to give me a clone to practice grow. he said "your first grow should at least give you some bud. at least this way with my clone your garenteed to have a female." my next grow will be from seed.

[TheGreenFog]

Looks good so far Spankey. Nice avatar, as well.

So you have plenty of room there. Nice closet. I would probably do more than 3, but...meh. It's good practice to start with just a few, especially if you are getting female clones. Bonus!

I enjoy listening to Zandor's podcasts as well. I'm working on number 15 or so.

So you are using THAT many compact flourescent lights? Why not just buy an HPS light? Heat? Can't vent? Just curious.

Good luck. Be cool. RastafarI.


The Fog :rastasmoke: