Results 21 to 30 of 37
Hybrid View
-
02-18-2007, 06:14 PM #1Senior Member
My small hard to clean bubbler.. :(
you can spare your pot (the cooking peice not the herb) by just filling the pot with water, then putting a glass of water into the pot as well and then your peice inside the glass, the water in the glass will heat up as well and the resin will fall away.
i did this with my peice when i cleaned it. well first i cleaned as much as i could out with a paper clip and got a nice marble sized resin ball (that tasted like ass hat :thumbsup: ). then i boiled my pipe using the above method and whatever didnt fall off the sides of the bowl, i could breath on it and it would fall off, its very loosely attached to the walls of the bowl.
hope it helps :twocents:Professor Dan K. Reviewed by Professor Dan K. on . My small hard to clean bubbler.. :( http://img247.imageshack.us/img247/6995/bubblerdu1.jpg There's a pic of it, I used a Q-tip to clean the top part, look how gross the bottom part is, I heard there is a chemical 420 that you can put in and it will help a lot? I just want it to be see through again :cool: Any suggestions? Rating: 5
-
02-18-2007, 07:18 PM #2Senior Member
My small hard to clean bubbler.. :(
get some rubbing alcohol (isopropyl not ethyl) from your local drug store, make sure you get the highest percentage possible, where I live the best you can get is 91%. Then fill a zip lock bag with the alcohol and throw your piece in the zip lock bag, shake it around real good then take an old cooking pot dump the alcohol in the pot and then repeat this process a couple times until the piece looks as clean as possible. Now set the piece aside for later. Now open up all your windows or do this with a cheap hot plate outside take the pot and put it on the stove, turn the stove on a real low heat (lowest possible) and let the alcohol boil down... once the alcohol is boiled down you should have a sticky black substance (resin)... now you can take a razor and scrape that shit off the bottom and smoke it!... and then finally if you so please you can get some formula 420 and wash out your piece just to get rid of the rest of the stuff left behind but whatever you do make sure you let all the alcohol evaporate from the resin and the piece cause you do not want to be smoking alcohol!
-
02-19-2007, 11:40 PM #3Senior Member
My small hard to clean bubbler.. :(
Originally Posted by Bob the Awesome
-
02-20-2007, 06:33 AM #4Senior Member
My small hard to clean bubbler.. :(
Originally Posted by Samwhore
-
02-20-2007, 01:24 PM #5Senior Member
My small hard to clean bubbler.. :(
water pick ftw ive got a couple stubern ones like that and i bought a water pick at the salvo for like 5$ and kinda modified the tip and vola a sic ass high preasure bong cleaner!
~Russ~
-
02-20-2007, 01:26 PM #6Senior Member
My small hard to clean bubbler.. :(
btw whats in fourmala 420 and those things ill do some reserch but can it be duplicated in the home kitchen?
-
02-20-2007, 11:23 PM #7Senior Member
My small hard to clean bubbler.. :(
id tend to think that the efferdent leaves some stuff behind if the resin tastes minty, are you sure the leftovers are ok to smoke?
-
02-20-2007, 11:26 PM #8Senior Member
My small hard to clean bubbler.. :(
Originally Posted by dankus maximus
-
02-21-2007, 12:06 AM #9Member
My small hard to clean bubbler.. :(
I always just use hot ass water in the sink. Shit takes for fucking ever though.I recently heard of chem 420, the efferdent shit sounds like its a bad ass idea lol all the fucking little bubbles and shit just doing the hard work for me. Gonna have to have the wife pick up some of that shit lol. 26 year old in walmart lookin for denture cleaner. lmfao.
oh yea I fucked up one of my wifes pots by boiling a friends glass piece in there.... I wouldn't recomend it lol. (never heard of putting a glass within the pot of boiling water then the pipe in the glass.)
-
02-21-2007, 12:08 AM #10Senior Member
My small hard to clean bubbler.. :(
ok heres what i found fourmala 420 and other such products are basicly isopropyl alcohol and an abrasive and an essential oil that gives it the good smell
so
best method ive found is
1.highest % isopropyl alcohol you can find
2.some absasive any type of salt/rice or whatever (be careful of things that are to harsh like sand)
3.lots of hot water before and after soking/shaking the iso solution
~Russ~
Advertisements
Similar Threads
-
Small Bubbler Burning me
By bassman94 in forum Marijuana MethodsReplies: 0Last Post: 12-16-2010, 09:28 PM -
How to clean a Cleaned Bubbler
By Danketies in forum Marijuana MethodsReplies: 3Last Post: 03-12-2009, 04:11 AM -
How to clean my bubbler
By gamepsyched in forum Marijuana MethodsReplies: 6Last Post: 07-12-2008, 09:27 PM -
How hard would this be to clean?
By ComfortablyNumb in forum Marijuana MethodsReplies: 11Last Post: 09-28-2007, 12:16 AM -
My new hard hitting deep bowl bubbler!
By Buddahbear in forum Marijuana MethodsReplies: 11Last Post: 01-18-2007, 08:34 PM