Can someone help me wire a 'lampholder'?

[ate]

How much more do you think it will grow until harvest?

How much do you think *she* () will produce?

:] :?

http://i158.photobucket.com/albums/t...t/100_3424.jpg

http://i158.photobucket.com/albums/t...t/100_3425.jpg

She's pretty small, methinks.

[notorious P.O.T]

during flower plants can double or triple in size..how many cfl's u got on her? and what wattage.. no ur plants not too small.. i force flowered mine much smaller then urs and got about 1/2 oz dried.. not bad for cfl's... so it depends.. most likely between 1/2 and 1 oz.. but i hope u pull a pound :rastasmoke: ..

[ate]

I have the 400w HPS on it right now, I took a small cutting, hopefully to get a good mother going so that I can continue vegging and just flowering the cuttings.

XD

What I would give for that.

Oh yea. Would it be possible to vent the room with no carbon scrubber through the first layer of drywall, and into the space between the walls, the "crawl space", without the small literally being distributed evenly throughout the house.

That would be quite hilarious. But stupid..

[notorious P.O.T]

well a 400 would deff get u more bud then a couple of cfls.. prolly between an oz - 1 1/2 oz..

yeah i vent into my crawl space with no scrubber.. but with my ice .. everyonce in a while i got a whiff... but they were stinky..

[Tokudai]

Congrats on your new mistress!

Don't go cooking her now, make sure your temps are good. Shes not that small, considering all things it should take off in the next couple of weeks. Under a 400 if things go well an oz easy

If your clone doesn't take, you can always try to re-veg the plant to get clones - some plants respond well to this, some do not like it at all. But you can try. Lemme know if you need info on this.

Venting into the walls - you CAN do that but as notorious said, you'll get the occasional whiff. Is anyone going to go looking for the dead skunk under the house? ;P

[ate]

Just to break the e-silence and give an update.






Thanks again guys.

[ate]

Computer Fans came today.

http://i158.photobucket.com/albums/t...t/100_3433.jpg

http://i158.photobucket.com/albums/t...t/100_3432.jpg

Need to get a thermometer.

Any comments?

I'm so happy I could make the fan do this, instead of having to get an oscillating fan. XD

http://www.youtube.com/watch?v=WKtXJ3nsZqE

[Tokudai]

Update! PICS! I wanna see your beeyotch!

[ate]

No problemo.

Here's a bud shot from yesterday.

Image of 3/31 - Photobucket - Video and Image Hosting

Right afterwards I tied down the main cola slightly, just to even the height of the bud sites out, I may not gain a large main cola, but I hope to maximize the yield now because the lower sites were getting next to zero light because of the huge fan leaves that were sitting off the main cola up top.

Here's a couple bud sites from just now:

http://i158.photobucket.com/albums/t...t/100_3496.jpg

http://i158.photobucket.com/albums/t...t/100_3493.jpg

http://i158.photobucket.com/albums/t...t/100_3497.jpg

Here's the whole setup, I cleaned up a bit, minimized everything.

http://i158.photobucket.com/albums/t...t/100_3495.jpg

http://i158.photobucket.com/albums/t...t/100_3490.jpg

In the last shot you can see the dryer tubing, that I attached to a metal vent piece and then drilled into the hood of my light, it now sucks air off the bulb via a fan on the outside of the closet, into the room. It keeps temps normal, except for that hot point of after about 11 hours with the light on. Other than that it's low, and acceptable, and there's no smell.

I'm thinking once the smell starts to come, I will buy the pieces to create a carbon scrubber and then buy an inline fan of a 6 or 4 inch kind and then just replace the now computer fan, with that. I'm sure that will take care of any problems. The sounds not too bad either, but the heat WILL build up in my room if I don't take care to crack a window or door to let it out, and that can get crazy. But I'm happy for the way things have gone.


I've got a clone in progress. :] Looks like she took.

http://i158.photobucket.com/albums/t...t/100_3507.jpg

Yay!..

http://i158.photobucket.com/albums/t...t/100_3506.jpg

http://i158.photobucket.com/albums/t...t/100_3508.jpg

Awww , mother plant has yellow drooping lower leaves.

Is this yellowing trying to move upwards as calcium or iron is being sucked from the plant because of lock-out/PH imbalance?


http://i158.photobucket.com/albums/t...t/100_3502.jpg

I think I splashed fert down there a few times...

http://i158.photobucket.com/albums/t...t/100_3504.jpg

Before, the whole closet:

http://i158.photobucket.com/albums/t...t/100_3433.jpg


After:

http://i158.photobucket.com/albums/t...t/100_3490.jpg

Much nicer to me. imp:

Thanks for all the help. I don't really know what to do much from here. I have a small but workable veg/clone chamber going. I really only want females from here on out, so I might get a nice little pot, weak soil, and then veg that rooted clone from here on out.

Although!!!

DUN DUN DUNNNNN, I found a friend of a friend that has NYC diesel growing, apparently he clones always. So I suppose finding a clone from him shouldn't be too difficult. Very head high stuff, I liked it, but my friend who smokes middies too much didn't, said he couldn't detect it. I could! :stoned:

And then another friend of a friend has some kind of strain, all I know is it's covered in crystals, and smells like fruit. Hopefully I can get a few clones of both and ...breed? Lol, I think I'm getting ahead of myself here.

So I guess that's it for an update, I need an inline fan still, and to make that carbon scrubber, and to put it all together and make sure it's not loud, and then build some type of air proofer for the closet, I think I'll just section off each side of the door way, and air-tight each side with black and white poly, and then just kind of shimmy/squeeze, stretch the fabric through in the middle to get through, it's pretty tough material.



Ask if you have any questions about the setup, ANYTHING that I could do to make it better, or any picture requests, I'd be happy to continue loading this thread up, and learning.

Edit: The bud site shots must've been from the 31 and that's a piece of a bandaid on my hand. XD

[ate]

Is it possible to cause a hermie by ripping off female flowers, letting male flowers grow back?

Or would it just be a hermie no matter what?

I may be having some trouble with this.

I'm getting those growths that look like the normal ones I've seen, only much larger and without a pistil.

But they're sort of like the ones that I normally see for the female flower, only right before the pistil pops out, and they are forming on the parts of the plant that are just now forming flowers, so it may just be a female that I'm confusing for hermie.

But they're only forming on the spots of the branch where I previously picked off the flowers. I'm thinking they were female flowers in the first place, and my picking them off, caused the plant to become hermie, but I'm too confused...