Easy way for making hash oil

[deaner]

hey i tried this method, just tried the final product, yay for this dude and this thread. heres my experience. used 100% acetone and used about 1/2 or so ounce of bud/trim/shake, soak for 2 days and then poured the mix through a coffee filter onto a pie baking glass dish, pyrex. 2 days of evaporation using a fan for about half of it, and ended up with what looks like super black tar, fresh shiny tar, semi-fluid, consistency of really really cold honey, mostly solid til ya poke it and its like freshly removed resins. i spread it on some decent bud, stuff that would take 10-15 hits for me to be really enjoyin things, and smoked about a good boogers worth, and yes this shit works, i normally dont dash to the computer to give an enthusiastic reply, im just pretty stoked, looks to be a bunch, if this is all i need, i got a fat marbles worth. im not sure if a good boogers worth is standard measure in your parts, and a fat marbles big, like a cherry, or the perfect nipple.. ok i measured, its between 3 - 4 millimeters.. (the booger, not the perfect nipple)
i really do hope at some point, someone is holding a marble up to their or their partners nipple. thanks for the thread.

[SouthernGuerilla]

Honey oil - Wikipedia, the free encyclopedia

Read!

Acetone - Wikipedia, the free encyclopedia

Also with acetone, its extremely dangerous. If you choose to use acetone buy pure acetone from a hardware or automotive store, it'll be sitting with the rest of the solvents they sell.

I do not use a plastic lid, I instead make a lid with aluminum foil and seal it with a rubber band. You could take your washed plant material and put in between two flat glass plates/discs and squeeze! Or something of a sort!

Be sure that ALL acetone / solvent has evaporated!

[AhHello]

Honey oil - Wikipedia, the free encyclopedia

Read!

Acetone - Wikipedia, the free encyclopedia

Also with acetone, its extremely dangerous. If you choose to use acetone buy pure acetone from a hardware or automotive store, it'll be sitting with the rest of the solvents they sell.

I do not use a plastic lid, I instead make a lid with aluminum foil and seal it with a rubber band. You could take your washed plant material and put in between two flat glass plates/discs and squeeze! Or something of a sort!

Be sure that ALL acetone / solvent has evaporated!

LOL Acetone is dangerous but butane fumes aren't?

Supercritical fluid extraction is the best method which BHO or Butane extraction is. There are solvents that are more selective then others. The best solvent for THC extraction is liquid CO2. It requires a special pressurized unit to extract with CO2 but yields a product of 98% pure cannabinoids which can be purified through isomerization to pure Δ9-THC.

Using solvents such as acetone, alcohol or ether will work to make hash oil, but it takes many more steps to obtain a pure product. Butane extraction is by far the easiest way to make the most pure hash oil. Isomerization of this oil or any oil for that matter, makes the same amount of product much stronger and it takes very little knowledge to perform the most common isomerization method list above.

[norcalkush]

i use vector 5 filter butane with copper fittins i made from home depot...
1 tea kettle
1brownie pan
1 pyrex pan to fit in the brownie pan
boil water continuasly
put boil water in brownie sheet then pyrex ontop floating ontop the boiling water... do this section outside it is safer as when u blow the only in the pyrex u will c the vapor rising very quickly after u blow all your oil into the pyrex and make shure u were adding boiling water everytime it cold... outside put fresh boil water n cover pyrex with towl i do this for 5 mintues then bring inside an put pyrex in a fry pan full with water n set to boil i do this with hand mittin to hold to pyrex in the boilin water i do this until i c no more bubble rise n should smell srtong to where u wanna sneeze... now u kno no containaments are in your oil

[deaner]

so is there any way to make the final product harder? its kinda hard to work with and can be messy, i have a system and am very happy with it, but my oil stays in its pyrex dish til its gone, i smoke what i want, leave the rest to scrape another day. I cant figure out how to store it or make it more portable, u dig? i tried making "wafer" sorta things, freezin em, but they were still messy, and i dont want them in my freezer.

im wondering if my final product could be harder if my starting product was completely dry?? either way the stuffs great, i got a jar i will pour tommorow, and a couple days evaporatin later, some crazy good smokin.

any suggestions on smokin it? i scrape it with a razor, scrape it off the razor with a paper clip, then just hit it (the oil laden paperclip) with the lighter for a quick second and drip it onto some bud or some old ragged bowl remnants, and voila!! but id like something a bit easier and not so paperclippy, u know? :stoned:

[Coelho]

so is there any way to make the final product harder? its kinda hard to work with and can be messy, i have a system and am very happy with it, but my oil stays in its pyrex dish til its gone, i smoke what i want, leave the rest to scrape another day. I cant figure out how to store it or make it more portable, u dig? i tried making "wafer" sorta things, freezin em, but they were still messy, and i dont want them in my freezer.

im wondering if my final product could be harder if my starting product was completely dry?? either way the stuffs great, i got a jar i will pour tommorow, and a couple days evaporatin later, some crazy good smokin.

Well... i noticed that when i let the weed soaking in the acetone for a long time (1-2 weeks), the final product is harder than when i let it soaking for only some days.
Anyway, you could add some powdered shake to it. The shake helps to harden the hash oil. If you add enough of it, you can even make it solid.

[joeiskrunk]

Hello Coelho, I was just wondering if using 14 grams of vaped weed and maybe adding some little extra amounts to it would yield at least a half gram of honey oil? I would like to use the Butane extraction with the PVC pipe draining into the Pyrex glasses but was also wondering if the isopropyl alcohol or butane extraction is more effective? I live in northern midwest and its getting somewhat cold out would this effect the butane if im doing it in weather outside around 32 Farenheit? I would love to hear some advice.
Much appreciated,
Joe

[SirHashaLot]

The black paste you guys are getting from this type of solvent extraction is great but like the the guy said it's hard to smoke and "What the hell do you do with it?" -

Here's the Trick of All Tricks:

Make your black paste, then make some bubble hash or good hard cooked keif (you can use regular uncooked keif but your hash will be soft)

Then crumble the bubble hash up and slowly blend it with the oil in ratios that allow it to form a big black ball. eventually all the oil is worked into your ball of bubble hash and you get a big black chunk of black hash. Let it dry and and becomes hard as a rock and is way better to smoke than the oil by itself and can be handled and stored without "sticky loss".

This is what I do to get the most out of the herb. Instead of getting 15% extraction of bubble hash and throwing the rest out, I can get up to 50% of the weight of the original herb turn 1 lb of shake into 1/2lb of decent hash using the oil method.

By the way if you smoke a lot of pot, then you really need this ELEV8

[SirHashaLot]

Another tip is to BE FUCKING CAREFUL!

The Solvents you guys are talking about can ignite from an open flame several feet away. my buddy lit a bowl while he was standing next to me watching me do this and the whole fucking thing lit up like a damn Christmas tree!

Always work in a WELL VENTILATED AREA! Don't fuck around and get stone and burn you house down! I was lucky because I had fire safety and knew what to do, but my buddy would have run out of the house and watched it burn down. Then when the cops and fire dept. figure out how the fire started and what I was doing, guess who's fire insurance would not have paid for the damage?!

Instead of using acetone or some other nasty solvent, I use Everclear from the liquor store. it's more expensive but that doesn't matter. it won't hurt you as bad to breath it, doesn't smell as bad, and it's made for human consumption. You can also pour some in at the end of your solvent batch to "Clean" your final product. After you get most

and if you smoke a lot of pot, then you really need this ELEV8

[SirHashaLot]

Another tip is to BE FUCKING CAREFUL!

The Solvents you guys are talking about can ignite from an open flame several feet away. my buddy lit a bowl while he was standing next to me watching me do this and the whole fucking thing lit up like a damn Christmas tree!

Always work in a WELL VENTILATED AREA! Don't fuck around and get stoned and burn your house down! I was lucky because I had fire safety and knew what to do, but my buddy would have run out of the house and watched it burn down. Then when the cops and fire dept. figure out how the fire started and what I was doing, guess who's fire insurance would not have paid for the damage?!

Instead of using acetone or some other nasty solvent, I use Everclear from the liquor store. it's more expensive but that doesn't matter. it won't hurt you as bad to breath it, doesn't smell as bad, and it's made for human consumption. You can also pour some in at the end of your solvent batch to "Clean" your final product. After you get most

and if you smoke a lot of pot, then you really need this ELEV8

my grammar sucks, sorry!