Activity Stream
227,828 MEMBERS
11162 ONLINE
greengrassforums On YouTube Subscribe to our Newsletter greengrassforums On Twitter greengrassforums On Facebook greengrassforums On Google+
banner1

Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 55
  1.     
    #31
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    Well, these first two holes I can cover up with a casing quite nicely, but a third one in that small old built in closet is gonna start looking pretty suspicious...So Ill have to do it on the opposite wall, which leads into a 10" gap between the closet wall and the bathroom wall.
    But its the last hole I dare make I think, so I really need to know where to punch it, what height etc. Do you have fans in all the openings in your diagram?

    Btw, thanks so much for taking the time

  2.     
    #32
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    faithless,The fans I drew are whatI have. I have little oscillating fans inside the room, but those are beside the point. What hole are you gonna punch? Can you draw a pic of what you plan on dopinw...kinda like mine?

  3.     
    #33
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    you might try settin up your fan to "push" air thru the cooltube, then straight out the wall.

  4.   Advertisements

  5.     
    #34
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    i suggest staying away from those inline duct fans. They suck ass at pulling air long distances. You need a inline centfirgual fan. Check em out...

  6.     
    #35
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    I use Vortex. Faithless, the fan in the little pic i have drawnmost recently is a 4" vortex and the one hooked up to the light is a 6" vortex.

  7.     
    #36
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    Yeah, Im think of punching it halfway down and on the opposite wall, where the diagram shows "New Exit". That way I have 2 exits, one midway and one higher up to experiment with. I guess I'll have to find out through trial and error which exit will work best for the Cooltube exit and which one will work best for ambient temps exhaust?

    Will I need another similiarly sized fan for the ambient temps exhaust? Cos they're pretty loud and expensive...

    About its capacity...any stronger than that and my coats hanging in the hall where it exits will start flapping. Theres a lot of air being pumped out...

  8.     
    #37
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    With the lower exit hole I could try your method.

  9.     
    #38
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    Another thing that might help is putting a little tower fan($20) right in front of the intake to suck air in and force the cool air up to force the hot air away fro the plants. In my set up I have a regular old bathroom exhaust fan to suck air out and started with 4 4" air intakes. The temp was too high so I cut 7 more intakes and the temp didn't change. The problem was that the air needed to be circulating around the room and a little tower fan in the corner droped my temp by 10 degrees.

    If I were you I would put the new exit in with a fan to suck out the air. I read somewhere that every 90 degree turnin tubing causes you to lose 1/4 air flow, so you are running at half with the 2 turns compared to a strait tube. If it is flexible maybe straiten it out so it runs at an angle from fan to exhaust with as few turns as possible.

  10.     
    #39
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    =I would get another fan. Have a dedicated room ehxaust and havew a dedicated lamp cooler. Try a fan in the room. Look into a Vortex fan, or something simlar. Id put that fan you have now as my room exhaust, and invest a little into a larger cetri fan and hook that up to your lights.

  11.     
    #40
    Senior Member

    AAAARRGGHH!!! I DONT UNDERSTAND!

    try a few thing and let us know what happenin.

Page 4 of 6 FirstFirst ... 23456 LastLast

Similar Threads

  1. I dont understand!!!
    By overdose42024 in forum Growing Information
    Replies: 2
    Last Post: 09-29-2009, 06:01 PM
  2. i dont understand strains
    By peble in forum Strains and Seeds
    Replies: 6
    Last Post: 02-04-2007, 11:05 PM
  3. I DONT UNDERSTAND THIS!
    By srhksr in forum Closet / Cabinet Growing
    Replies: 6
    Last Post: 12-23-2006, 06:06 AM
  4. i dont understand this at all
    By GHoSToKeR in forum GreenGrassForums Lounge
    Replies: 30
    Last Post: 09-25-2004, 10:37 AM
Amount:

Enter a message for the receiver:
BE SOCIAL
GreenGrassForums On Facebook