Update..
Ok, this is my new idea for ventilation.
First I buy a blower, air cooled hood, ducting, and two five inch axial fans.
I want a 465 cfm Dayton blower. I have to buy the fittings along with ducting. The DUAL hose fittings, they connect to the blower, and I would mount them into the top of the box. One side of the blower is connected to a long tube running, in the corner, to the bottom of my box which has holes up along the side. The air can pass freely through the plants, from all over.
The second side is to be connected to the ducting, which runs through the air cooled hood and out the side of the box.
The axial fans are placed into the side of the box, near the top to draw heat out, as well as old air. (These small, five inch fans pack a 365 cfm)
So the two questions I would like to have answered..
Would the blower push to much air for the plants? They would be flowering before it would be on, and I would have a smaller fan on them while vegging to help build stem.
The second would be, how much would this shit cost on the electric bill and would it all be able to be hooked up without a seperate breaker?
Durring vegitation: TWO compact fluros, AT THE MOST, would be on, 24/7.
The two axial fans would be on, well, I dont know, what should they be on?
and a smaller fan used to circulate the air would be on 24/7.
Flowering: 12/12 - 400w HPS, Dayton blower and axial fans, along with the air circulating fan on 24/7.
Thanks
Skateboardingpunk420 Reviewed by Skateboardingpunk420 on . New Box, finally Yep, built from scratch.. Demensions: 4'H x 2'L x 2'1"W just a quick post, not growing in this yet. I'm getting either 2 or 4 5" axial fans from http://www.discounthydro.com/ventilation.asp#vortex Mounted at the top (Air Out) And bottom (Air In) 125w Daylight bulb, along with hydrofarm reflector/fixture for vegging. (Optionial: May get some more fluro's and mount of the walls, but I dont know yet) 400w HPS for flowering Rating: 5