Next to build is the Outer Chamber.

Pic1-Supplies
6" cap
2 - 6.5" screw clamps/fasteners
12" length of Heavy duty chicken wire
3 - pannyhose legs

pic2 - Wrap the 12" length of chicken wire around the 6" end cap to form a cylinder. I used a bunch of zip ties to secure the cylinder's shape.

Pic3 - Slide the pannyhose legs over the cylinder to act as a screen for the carbon.

Pic4 - Now you should have all of these parts....almost done:thumbsup:

Pic5- Now slide the 6" cylinder over the 6" section of the 6"-4" reducer (and the inner chamber) and secure with a 6.5" screw fastener