Well I was looking around the Internet today at some pollen pressers as im sick of pressing hash the long way lol. I then came up with this idea.
1.
Take a regular bold about 2cm wide with the whole in the middle being about a cm wide, roll up a bit of card or a magazine cover about a inch long and big enough to fit snuggly inside the bolt.

2.
So now you have a bolt on a bit of rolled up card, you now find a metal pole or any long straight metal instrument that will also fit snuggly inside the bolt and card, wrap another piece of card around the pole if it has a thread on it if not don't worry about it.

3.
You should now have a metal pole with a bit of card around it with a bolt on it. Now its easy.

4.
Take the pole out of the bolt put your keif into the little card tube that is inside your bolt (keep the tube on a flat surface at this point, now get the pole and apply pressure so that it is pushing your keif onto your flat surface.

5.
Give it about 20 hits fairly hard with your hammer.

6.
Remove the pole and the tube in the middle of your bolt should easily slide out allowing you to unroll it and retrieve your tightly pressed keif.

Note: It is an idea to do this after using the normal oven method while the keif is still warm as a final pressing stage.

Hope you liked my guide
lil josh Reviewed by lil josh on . Easy Way To Press keif. Well I was looking around the Internet today at some pollen pressers as im sick of pressing hash the long way lol. I then came up with this idea. 1. Take a regular bold about 2cm wide with the whole in the middle being about a cm wide, roll up a bit of card or a magazine cover about a inch long and big enough to fit snuggly inside the bolt. 2. So now you have a bolt on a bit of rolled up card, you now find a metal pole or any long straight metal instrument that will also fit snuggly Rating: 5