Bong Problems...

[Steezy]

Hey i made this bong, and it doesnt seem to work, the bowl is crap, which seems to be the problem. I put a wire fence piece into the rubber bowl, but it doesnt stay. Is there any other way to make a bowl, and is there any other problem?

Steezy Reviewed by Steezy on 11-28-2006. Bong Problems... Hey i made this bong, and it doesnt seem to work, the bowl is crap, which seems to be the problem. I put a wire fence piece into the rubber bowl, but it doesnt stay. Is there any other way to make a bowl, and is there any other problem? Rating: 5

[b0Ng h!tz 4 mE]

bong man to the rescue!!!!!! *WOOSH*

http://www.fat-pie.com/bfm.htm

[EmoRebellion]

Uh, first off, you need to tell us why it doesnt work. What is the problem.

Secondly, you need the bowl to actually go into the water. Otherwise you have what we like to call a PIPE. And a cheap pipe at that.

[Mean Green Charlene]

That video..amazed me.

[Steezy]

Uh, first off, you need to tell us why it doesnt work. What is the problem.

Secondly, you need the bowl to actually go into the water. Otherwise you have what we like to call a PIPE. And a cheap pipe at that.

If you read it, i said it was the bowl, and if theres another way to make one.

[EmoRebellion]

I need some pics of the whole thing.. That just doesnt look like a functional design to me.

[biohazard]

you do realise that a rubber bowl is a guaranteed way to health problems?

http://www.watch4time.co.uk/photos/i...pg&type=scaled

^^ use one of those wrench sockets, and put a small screen inside them to stop the weed from going into the hole (some sockets have larger holes, but a small metal mesh screen solves that problem).

[slipknotpsycho]

yeah i was about to say wtf, how come NO ONE has noticed that he said it's a rubber bowl yet.... that must taste like pure ass.... use a socket... make sure everything is air tight... electrical tape works best (looks like what you got there is some of that painters blue masking tape... masking tape just sucks for bongs/pipes...) or you can use hot glue... if you use hot glue on the actual bowl to connect it to the stem, make sure you get a bowl and stem that pretty much stick together on their own, then just use the hot glue (DO NOT put it anywhere near where direct flame will touch it) to seal it up so there are no leaks... also i'm confused, looks like you have a normal body to the bong but then you have that hose, wtf is the hose for?

[Steezy]

Thanks for the help, that hose was the part i inhaled, i guess i didnt make it right, but theres a hole in the back to put a finger over while inhaling.