Ok so I got most of it done today, I have the box all built (2'x2'x4') My 250HPS with remote ballast is about to be ordered. I still need to create the vent holes, attach my hinges, andlock, do some painting on the inside etc. tomorrow.

I decided instead of using the metal chicken wire, I weaved my own using twine pulled tightly. From what I read this should be ok, I just didnt want any rusting, or cutting happening from the metal chicken wire.

Ok so this box is (2'x2'x4') should I look into getting a squirrel cage blower (200cfm), or could I get away with just a small turning fan sitting in there?

This is my first build/scrog attempt please feel free to comment/suggest! Also attached is a picture of the mother (from my first grow) I will be taking my 6 clones from.

Later