2x2x4 Scrog Box

[redman71]

I am about to go to Lowes and get some wood to build a 2x2x4 Scrog Box.....after studying SCRoG I must build it.....will report back later

:thumbsup:

redman71 Reviewed by redman71 on 11-16-2006. 2x2x4 Scrog Box I am about to go to Lowes and get some wood to build a 2x2x4 Scrog Box.....after studying SCRoG I must build it.....will report back later :thumbsup: Rating: 5

[redman71]

Ok so I got most of it done today, I have the box all built (2'x2'x4') My 250HPS with remote ballast is about to be ordered. I still need to create the vent holes, attach my hinges, andlock, do some painting on the inside etc. tomorrow.

I decided instead of using the metal chicken wire, I weaved my own using twine pulled tightly. From what I read this should be ok, I just didnt want any rusting, or cutting happening from the metal chicken wire.

Ok so this box is (2'x2'x4') should I look into getting a squirrel cage blower (200cfm), or could I get away with just a small turning fan sitting in there?

This is my first build/scrog attempt please feel free to comment/suggest! Also attached is a picture of the mother (from my first grow) I will be taking my 6 clones from.

Later

[rollone]

[attachment=o101142]
Looks good. This is mine. Prolly took alittle longer then your though. Labor of love..isn't it
Hope it performs for ya:thumbsup:

[kindprincess]

you'll need to exhaust the heat from that hps...

love, kp

[redman71]

you'll need to exhaust the heat from that hps...

love, kp

This box is (2'x2'x4') should I look into getting a squirrel cage blower (200cfm), or could I get away with just a couple of small 6" turning fans sitting in there?

[redman71]

Well I found a 180cfm Dayton blower, I think this will do the trick......

[redman71]

[attachment=o101142]
Looks good. This is mine. Prolly took alittle longer then your though. Labor of love..isn't it
Hope it performs for ya:thumbsup:

That is awesome!!!! Total stealth.......kick ass!:stoned:

[rollone]

hey BTW....
I see by the position of your screen that you plan on having roughly 2' of height.
this isn't going to happen with a 250hps, and a 180cfm blower. thats not enough height for ya.
IMO you should turn your cab. upright....like mine is in that photo. this will allow you much more room.
Good Luck

[redman71]

Good call.....yea I just had someone else tell me that too...I wasnt thinking...you guys are right, I am going to stand it up to 4' tall...