How To - Carbon Filter

[Bodom Children Of]

Pic 1- Here are all the supplies you need for this 4" carbon scrubber.

Bodom Children Of Reviewed by Bodom Children Of on 11-08-2006. How To - Carbon Filter Pic 1- Here are all the supplies you need for this 4" carbon scrubber. Rating: 5

[stinkyattic]

Puta, you can't post under that username. It's been permanently banned. Please use more discretion when choosing a handle. Thank you.

[deadhead65]

it passes through the carbon(cleaning the air) and comes out the sides....where the panty hose is.

:thumbsup:

wow i can be really dense at times!! lol

[Puta]

Hey bros, does a 6" vortex fan fit with this filter? If not, what changes should I made?

[deadhead65]

I don't see how that works either, but I also don't see where that was mentioned. Could you please post a link to the post?

It's common to go (scrubber)<-(inline fan)<-(duct) or with the air flowing in the opposite direction.

edit: I don't think you're missing anything at all.

So the scrubber would be the last thing the air hits before it goes outside of the closet? But still, even that way...how does it get past the cap?

[canuck grower]

I don't see how that works either, but I also don't see where that was mentioned. Could you please post a link to the post?

It's common to go (scrubber)<-(inline fan)<-(duct) or with the air flowing in the opposite direction.

edit: I don't think you're missing anything at all.

[keeko]

So the scrubber would be the last thing the air hits before it goes outside of the closet? But still, even that way...how does it get past the cap?

it passes through the carbon(cleaning the air) and comes out the sides....where the panty hose is.

[deadhead65]

I still don't get how if you set it up as (inline fan)(scrubber)(duct) the air is going to go anywhere once it hits the scrubber since there's a cap on one end of it.

What am I missing here?:wtf:

[Splifted]

All the shit you build rules. I'm building one of these too. We got the carbon filter squares made for like an AC instead of the powder and pantyhose, everything else is the same. I'll let you know how it goes.

[Bodom Children Of]

First thing to build is the inner chamber.

pic1 - supplies:
6"-4" reducer
4" cap
2 - 4.5" screw fasteners
10" length of Heavy duty chicken wire
2 - pannyhose legs

pic2 - Wrap the 10" length of chicken wire around the 4" end cap to form a cylinder. I used a bunch of zip ties to secure the cylinder's shape.

Pic3 - Slide the pannyhose legs over the cylinder to act as a screen for the carbon.

Pic4 - Secure the end cap on one end of the cylinder with one of the 4.5" screw fasteners.

Pic5 - Secure the 6"-4" reducer to the open end of the cylinder with the other 4.5" screw fastener.

That's it. The inner chamber is done. Set aside we'll need it in a bit.