How To - Carbon Filter

[Bodom Children Of]

Pic 1- Here are all the supplies you need for this 4" carbon scrubber.

Bodom Children Of Reviewed by Bodom Children Of on 11-08-2006. How To - Carbon Filter Pic 1- Here are all the supplies you need for this 4" carbon scrubber. Rating: 5

[Splifted]

All the shit you build rules. I'm building one of these too. We got the carbon filter squares made for like an AC instead of the powder and pantyhose, everything else is the same. I'll let you know how it goes.

[Bodom Children Of]

First thing to build is the inner chamber.

pic1 - supplies:
6"-4" reducer
4" cap
2 - 4.5" screw fasteners
10" length of Heavy duty chicken wire
2 - pannyhose legs

pic2 - Wrap the 10" length of chicken wire around the 4" end cap to form a cylinder. I used a bunch of zip ties to secure the cylinder's shape.

Pic3 - Slide the pannyhose legs over the cylinder to act as a screen for the carbon.

Pic4 - Secure the end cap on one end of the cylinder with one of the 4.5" screw fasteners.

Pic5 - Secure the 6"-4" reducer to the open end of the cylinder with the other 4.5" screw fastener.

That's it. The inner chamber is done. Set aside we'll need it in a bit.

[Bodom Children Of]

Next to build is the Outer Chamber.

Pic1-Supplies
6" cap
2 - 6.5" screw clamps/fasteners
12" length of Heavy duty chicken wire
3 - pannyhose legs

pic2 - Wrap the 12" length of chicken wire around the 6" end cap to form a cylinder. I used a bunch of zip ties to secure the cylinder's shape.

Pic3 - Slide the pannyhose legs over the cylinder to act as a screen for the carbon.

Pic4 - Now you should have all of these parts....almost done:thumbsup:

Pic5- Now slide the 6" cylinder over the 6" section of the 6"-4" reducer (and the inner chamber) and secure with a 6.5" screw fastener

[Bodom Children Of]

Filling with Activated carbon and finishing it.

pic1 - Without the 6" end cap on the bottom, the filter should look like this....notice this space in between the chambers....this is where the activated carbon goes.

pic2 - I used an oil spout with the end cut off to more easily disperse the carbon into the filter.

pic3 - Here is the filter filled with carbon.

pic4 - Finally put the 6" end cap on the bottom and we're good to go.

Pic5 - Here is the finally product.


Have fun kiddies...post if you have a question:thumbsup: :smokin:

[turtle420]

Niiiceee.

Has my vote for another FAQ in our library.

Thanks Bodom!

[mPk]

i was wondering.. is the carbon air filter for vegging and flowering? or for curing bud? thanks

[Bodom Children Of]

i was wondering.. is the carbon air filter for vegging and flowering? or for curing bud? thanks

All three....whenever the plant starts to get noticably stinky. :smokin:

[mPk]

ooo alright i so feel like a noob right now... its only for removing odor right? i thought it was for the buds to get bigger

[Bodom Children Of]

ooo alright i so feel like a noob right now... its only for removing odor right? i thought it was for the buds to get bigger

yes just for removing odors. :smokin: