Alright everyone tell me what you think about this.

Using part of a walk-in closet, utilizing a space of 6'Hx3'Wx2'D. taking the bottom two feet of the cab and use it as a vegging/clone chamber, and the four other feet for flowering.

The vegging chamber would be lit by two 27 watt CFLs (100w rating), hung in the middle of the chamber using a V fixture. The flowering chamber will be illuminated by a 400 watt HPS using a mirrored batwing reflector. For cooling/venting purposes a small intake fan (suggestions on size) would be blowing at the HPS. This would also be providing the fresh air into the chamber. Then at the oposite end of the section there will be another fan used to exhaust the hot/old air through the ceiling into a carbon can filter, and then into the air. I would also appreciate any suggestions on the sixe of the fan for this purpose as well.

I would also be using light safe vents at the bottom of the flowering section for air intake. As for the vegging section there will be a total of four, two on top at either end, as well as on bottom.

This will be an organic grow in soil from seed. I would like to use some compost tea that I found was pre-mixed. I would love any ideas of a DIY organic soil mix. Using supplies obtained at a home improvement store, or nursery. There will be panda film lining the floor of each section, and the rest with mylar.

Any suggestions/advice on this would be greatly appreciated.

Respect.
G_V

*Anything I post on this site is purely hypothetical, I do not grow anything illegal, nor do I condone any such actions.*
Good_Vibrations Reviewed by Good_Vibrations on . Closet Idea...Any Suggestions? Alright everyone tell me what you think about this. Using part of a walk-in closet, utilizing a space of 6'Hx3'Wx2'D. taking the bottom two feet of the cab and use it as a vegging/clone chamber, and the four other feet for flowering. The vegging chamber would be lit by two 27 watt CFLs (100w rating), hung in the middle of the chamber using a V fixture. The flowering chamber will be illuminated by a 400 watt HPS using a mirrored batwing reflector. For cooling/venting purposes a small Rating: 5