Thanks guys for the input. It is VERY MUCH appreciated.

I am LSTing and still in Veg while I sort out the heat issue...

I closed the flap for 3 hours. When I opened it, it was 90.1...

1. I am going to MOVE THE BALLAST. I am a DUMBASS for putting it inside the box and not on top! The top is 1/2 plywood... I have moved it OUTSIDE the box just now!

2. I have sealed the ring around the glass globe so my exhaust fan is pulling all the air directly from the bulb. (it was duct taped and the tape slowly slipped off. Now it is foil...still temporary)

3. The carbon/dryer sheet vent box I am building will sit on top as well. I have put TWO intakes in it so I can add another exhaust fan if I have to... From the top of the cabinet where the heat gathers... If I dont need it, I will use that end as the exhaust.

I am going to close the flap for an hour...

I am looking for a clip on fan that runs on A/C, not D/C...
4. Those silver things go back in my cars ASAP. I have removed the top one. I will paint the inside white before the next batch, but for now, I will do the paper thing I think...