One 40 OZ PREMIUM MALT LIQUOR BOTTLE (green mickeys bottle in my case)
One Bong slide.
Clear Plastic tubing (2$ at home depot plumbing section)
Gum For sealing.

Unscrew an empty 40 oz bottle.
Stab it with a knife.
Make two holes, one for the bong slide, one for the hose to suck out of.
Put the glass piece down through, I attatched some clear plastic hosing to get the smoke under the water.
Put some Clear plastic tubing about an inch down.
Place gum to seal, on the underside of the cap works best, but on top works aswell.

Add HERBS And blaze. The final result is you get a bottle full of bong smoke with a hose to suck it out of.
Buddahbear Reviewed by Buddahbear on . My home made 40 OZ. Bubbler/Hoser Bong. One 40 OZ PREMIUM MALT LIQUOR BOTTLE (green mickeys bottle in my case) One Bong slide. Clear Plastic tubing (2$ at home depot plumbing section) Gum For sealing. Unscrew an empty 40 oz bottle. Stab it with a knife. Make two holes, one for the bong slide, one for the hose to suck out of. Put the glass piece down through, I attatched some clear plastic hosing to get the smoke under the water. Put some Clear plastic tubing about an inch down. Rating: 5