you gotta plug the cord from the light(three prongs) into the ballast. There is a socket to plug into. Then you have a cord from the ballast which is the one with the 3 wires(green,white,black). You need to wire on another male end(3 prongs) like on an extension cord. Black is your power, white is your neutral, and green is your ground. Hope this helps.
Weed4Life Reviewed by Weed4Life on . 600 Watt HPS setup issues... Any advice appreciated! Here is a picture of the setup. Hydrofarm 600 watt hps a friend of mine let me borrow his old equipment for a grow this is my first grow with hps...tried cfls throughout but didn't have much success...so trying this out now... SO my question is..what do i need to do from here to connect it? thanks in advance for any help Rating: 5