wirering help fast please

[c of green]

i just got a 70 watt hps that i had to rewire to take out a photosensory switch.i did it wrong do you know how to fix it???ballast has red blue andblack wires,ignitor has the same ,socket has white and black please help

c of green Reviewed by c of green on 08-21-2006. wirering help fast please i just got a 70 watt hps that i had to rewire to take out a photosensory switch.i did it wrong do you know how to fix it???ballast has red blue andblack wires,ignitor has the same ,socket has white and black please help:( Rating: 5

[OmegaVermelho]

http://www.venturelighting.com/Balla...grams-Add.html

hope this helps dude

[invision]

wire the reds together,the blues,and the blacks.

so now we have 3 sets of wires lets take the socket and wire the white wire to the red wires.

now lets take the black wire and and wire it to the other black wires.

ok now the cord it should have 3 wires as well white,black, and gray.

lets wire the white to the red/white wires and cap them or tape them.

black wire to the black wires and cap them or tape them

the gray wire is ground i usually ground this wire on something metal like the box to the ballast.

this should be it really not that hard once you have done it hope this helps