Activity Stream
227,828 MEMBERS
11217 ONLINE
greengrassforums On YouTube Subscribe to our Newsletter greengrassforums On Twitter greengrassforums On Facebook greengrassforums On Google+
banner1

Page 1 of 3 123 LastLast
Results 1 to 10 of 23
  1.     
    #1
    Senior Member

    Joint problem (wont stay lit)



    Well last night I rolled a jay, and it wasn't hitting too well, plus it went out after every hit. So I had to unroll the joint and use my pipe instead, as you can see the papers still in my ashtray. I figured that weed wasn't broken up enough, and it was too thick to draw smoke and also wouldn't burn cause there was no flow, also I may have rolled it too tight.. Well tonight I used scissors and I thought I got it ground up pretty good, and I even unrolled is several times before sealing it to make sure it wasn't too tight. This one hits fine, but it just won't stay light. I've never had this happen to me before so I'm a little confused. The weed doesn't seem like its damp, so I don't think thats the problem, it might be, but I'm not sure.

    Anyone care to give some input?
    Frivolous248 Reviewed by Frivolous248 on . Joint problem (wont stay lit) http://img246.imageshack.us/img246/9813/brndvk4.jpg Well last night I rolled a jay, and it wasn't hitting too well, plus it went out after every hit. So I had to unroll the joint and use my pipe instead, as you can see the papers still in my ashtray. I figured that weed wasn't broken up enough, and it was too thick to draw smoke and also wouldn't burn cause there was no flow, also I may have rolled it too tight.. Well tonight I used scissors and I thought I got it ground up pretty good, and Rating: 5

  2.   Advertisements

  3.     
    #2
    Senior Member

    Joint problem (wont stay lit)

    Even a slight bit of extra moisture will cause runs and joints that go out.If you can bend a decent sized stem and it DOESN'T snap off clean,then you still have excess moisture in the bud.

  4.     
    #3
    Senior Member

    Joint problem (wont stay lit)

    pack it more. that might be your problem. make sure that it is packed tight

  5.     
    #4
    Senior Member

    Joint problem (wont stay lit)

    I put tobacco in joints to help them burn well...it works nicely and tastes better in my opinion.

  6.     
    #5
    Senior Member

    Joint problem (wont stay lit)

    blah dont put baccy in your j's!! keep it pure


    Take a pencil or something a bit smaller than the width and pack in the ends. You could also try letting it dry out more, or breaking the bud up finer.

    I get bud that is impossible to roll joints with, doesnt work, too sticky, feels like its been dipped in maple syrup

  7.     
    #6
    Senior Member

    Joint problem (wont stay lit)

    tb has its place and mj has hers. personally i dont like to mix them. cant rip it as good.

  8.     
    #7
    Senior Member

    Joint problem (wont stay lit)

    Quote Originally Posted by CBsDankNugs
    tb has its place and mj has hers. personally i dont like to mix them. cant rip it as good.
    agreed, baccy is harsh to me

  9.     
    #8
    Senior Member

    Joint problem (wont stay lit)

    well I always did it that way since everyone I know does that over here...It became a habit. I tried pure sometimes but I still like it better with baccy in it...you don't even taste it and I like the little rush nicotine adds :dance:

    I guess everyone has their ways

  10.     
    #9
    Senior Member

    Joint problem (wont stay lit)

    Quote Originally Posted by Frivolous248


    Well last night I rolled a jay, and it wasn't hitting too well, plus it went out after every hit. So I had to unroll the joint and use my pipe instead, as you can see the papers still in my ashtray. I figured that weed wasn't broken up enough, and it was too thick to draw smoke and also wouldn't burn cause there was no flow, also I may have rolled it too tight.. Well tonight I used scissors and I thought I got it ground up pretty good, and I even unrolled is several times before sealing it to make sure it wasn't too tight. This one hits fine, but it just won't stay light. I've never had this happen to me before so I'm a little confused. The weed doesn't seem like its damp, so I don't think thats the problem, it might be, but I'm not sure.

    Anyone care to give some input?
    wow, that was a peice of crap rolling job you had there, next time you need to take you time on it, keep it somewhat loose, make sure the weed is dry and shredded, when you take the first drag make it long and smooth so it draws back and stays lit,

    better luck next time

  11.     
    #10
    Senior Member

    Joint problem (wont stay lit)

    Quote Originally Posted by MaryjaneAndHashley
    well I always did it that way since everyone I know does that over here...It became a habit. I tried pure sometimes but I still like it better with baccy in it...you don't even taste it and I like the little rush nicotine adds :dance:

    I guess everyone has their ways
    I agree man baccy is good, it helps keep it lit, burns nicely and plus you use less weed to fill up your joints, so you would have more for later, and the baccy does give you a phat headrush, trust its good, and if you have good will power you won't get addicted, i've been blazing with baccy for a year and i'm not addicted, dunno how it would work for you but baccy would keep it burning and in my opinion it's easier to roll with.


Page 1 of 3 123 LastLast

Similar Threads

  1. my ph wont stay put
    By hippygirl420 in forum Hydroponics
    Replies: 4
    Last Post: 04-10-2008, 02:02 PM
  2. Joint problem
    By Fore20 in forum Marijuana Methods
    Replies: 5
    Last Post: 07-21-2007, 07:21 AM
  3. JOINT PROBLEM-PLEASE READ
    By Mr.biggs in forum Marijuana Methods
    Replies: 32
    Last Post: 07-17-2007, 05:26 AM
  4. Wont stay lit
    By op peat in forum Experiences
    Replies: 12
    Last Post: 10-21-2006, 08:53 PM
  5. Problem With Joint
    By xkasx12 in forum Marijuana Methods
    Replies: 7
    Last Post: 02-15-2005, 12:19 AM
Amount:

Enter a message for the receiver:
BE SOCIAL
GreenGrassForums On Facebook