I might have just got an idea. I could turn the cabinet on it's side. I would lose a couple inches in height, but i would gain like 5+ inches in width. This way i could tie the plant down and keep it short and bushy. That just may work.
hoodrider Reviewed by hoodrider on . We have a problem Well i started to set up a cabinet, but ran into a slight problem. Actually a huge problem. The light doesn't fit. I'm running a Sun Systems New Wave 24 and it is 3/4" to wide for the inside of a cabinet. So how can i fit this bezzy in there? Well i came up with the idea to plane/saw a channel 3/8" on each side so i could squeeze the wide part of the light in. I have a picture posted below with the blue area being where i would create a channel. If you have any comments or other ideas Rating: 5