Here is another, more revealing picture of it. The paper I used was ZigZag Lights, 1 1/4 pre-gummed. I used an index card cut to the same height as the filter I pulled out, and rolled up tight for the roach. I wet the very end REALLY wet, and twisted it up tight, then let it dry, and snipped off the twist.

You can see where my paper and the filter overlap, and where I used a cut off, gummed up, strip to seal and secure the filter paper to the zigzag paper. I'm working on overlapping the two less and less to expose more of the filter paper and make it look better, but it gets tough to hold onto everything and roll it up tight.

[attachment=o80636]