Homemade Carbon Scrubber from OG...please look

[Methyl3]

Here is a link to a saved DIY Carbon Scrubber. Seems good, but I am not clear on a couple of things as I have never had to use one, hence never seen one! LOL

http://www.hg420.com/showthread.php?...=carbon+filter


In a synopsis I see I have a cylinder of hardware cloth and then another cylinder of hardware cloth with in. I assume the carbon fills the gap between the two. If this is the case, is the poly fill being put into the very center core (from end to end) or is it with the carbon and just at the ends? How am I to get the outer layer of panty hose to attach? If only the clamp holds the end cap and the panty hose down, will they rip or does it just stay folded over the end? Thanks for any description as the pics are small and not very resolute.:thumbsup:

Methyl3 Reviewed by Methyl3 on 07-19-2006. Homemade Carbon Scrubber from OG...please look Here is a link to a saved DIY Carbon Scrubber. Seems good, but I am not clear on a couple of things as I have never had to use one, hence never seen one! LOL www.hg420.com/showthread.php?t=14584&highlight=carbon+filter In a synopsis I see I have a cylinder of hardware cloth and then another cylinder of hardware cloth with in. I assume the carbon fills the gap between the two. If this is the case, is the poly fill being put into the very center core (from end to end) or is it with Rating: 5

[Tokudai]

You are correct about where the carbon goes - I used the crystal/pearl type kitty litter myself, much cheaper and easier to get and just (?) as efficient.

The polyfill is like a "cap" on the carbon, just on the ends, so it doesnt move and stays compacted - the center is totally empty and is where you pull air through (or push air into)

Make sure you get metal hardware cloth that is plastic coated, so the pantyhose slides better - you can use 2 on top of each other if you put a run in them

GO to Lane Bryant, Or Catherines, or any local "PLus Size" womans shop, and get the biggest pair of pantyhose they have Size F (5'3"-5'9", 400-450 lb)
.. (Hehe the lady looked at me when I asked and said "Sir, these would be way too big on you!")
They won't rip if you are careful pulling them over the shell, but you can double them up if ya rip em - just costs 2x.. the foot of the panties will be on the bottom, and the top is held up by the hoseclamp

[Methyl3]

You are correct about where the carbon goes - I used the crystal/pearl type kitty litter myself, much cheaper and easier to get and just (?) as efficient.

The polyfill is like a "cap" on the carbon, just on the ends, so it doesnt move and stays compacted - the center is totally empty and is where you pull air through (or push air into)

Make sure you get metal hardware cloth that is plastic coated, so the pantyhose slides better - you can use 2 on top of each other if you put a run in them

GO to Lane Bryant, Or Catherines, or any local "PLus Size" womans shop, and get the biggest pair of pantyhose they have Size F (5'3"-5'9", 400-450 lb)
.. (Hehe the lady looked at me when I asked and said "Sir, these would be way too big on you!")
They won't rip if you are careful pulling them over the shell, but you can double them up if ya rip em - just costs 2x.. the foot of the panties will be on the bottom, and the top is held up by the hoseclamp

LOL at the comment from the lady! Thats some funny shit. My wife and I are in pretty good shape and I can only imagine what someone will think when I go to get these! LOL Probably that I like tapping some huge asses! LOL

Thanks for the clarification as I think you cleared some things up for me. Off to the store!:thumbsup:

[Aaron385]

if you havent started this yet I highly recommend the can filter 2600..

http://www.wormsway.com/detail.asp?sku=CF0062

MSRP is $59.99 and you can find it for less! It is way more sturdy than that design posted above.. I own one and love it.. check the ratings on it too.. super good.. It has 12lb of activated carbon.. compaired to...

"Three 28oz jars" (5.25lb)

my rec... dont waste your time and money! order the original can filter.. you will NOT be disappointed!

[Methyl3]

if you havent started this yet I highly recommend the can filter 2600..

http://www.wormsway.com/detail.asp?sku=CF0062

MSRP is $59.99 and you can find it for less! It is way more sturdy than that design posted above.. I own one and love it.. check the ratings on it too.. super good.. It has 12lb of activated carbon.. compaired to...

"Three 28oz jars" (5.25lb)

my rec... dont waste your time and money! order the original can filter.. you will NOT be disappointed!

My only concern is that the squirrel fan I am thinking of getting (either 265 or 465 cfm) will be too strong for this can filter. Its only rated at 94 cfm and I think the blowers I mentioned will not allow the odor to be in contact with the air long enough. Correct me if I am wrong and I will take it.

[Methyl3]

if you havent started this yet I highly recommend the can filter 2600..

http://www.wormsway.com/detail.asp?sku=CF0062

MSRP is $59.99 and you can find it for less! It is way more sturdy than that design posted above.. I own one and love it.. check the ratings on it too.. super good.. It has 12lb of activated carbon.. compaired to...

"Three 28oz jars" (5.25lb)

my rec... dont waste your time and money! order the original can filter.. you will NOT be disappointed!

I think I have decided to go with the Can-filter 900 118 CFM and the 265 CFM blower. Hope this works well as superskunk should be stinky inky!:thumbsup:

[Aaron385]

definatly.. because you have to realize that that cfm rating is based on unrestricted suction and the can filter WILL restrict suction.. Im using an el cheapo 400cfm (or so they say) fan suckin on that 2600 filter and I can tell that it cant be more than 100cfm comin thru.. when I had the fan sitting on a table and fired it up It almost propelled itself across the freaken table.. attached to the filter it is much more reasonable.. buy a fan that well exceeds the rating of the filter.. unless its a really good fan like the can fans and then only exceed by about 25-50% I think it is.

Somewhere I heard it works better to suck thru the filter than blow thru it.. but Im not sure.. could be.. I know the dust sock is on the outside.. my plan was to turn the $25 fan I got whichever way worked best (which i figured was gunna be blow thru) and it turned out that it sucked thru just fine.

[latewood]

experiment bump