Results 1 to 4 of 4
-
07-10-2006, 04:57 AM #1OPJunior Member
Heat Problems with 250 HpS
Hi everyone been doing alot of reading but ive still run into some problems. Ive constructed my first grow box that measures 2x4x5. I have my sun system V in there which is 250 HPS bulb + ballast. For my exhaust i have a dayton blower rated at 465 CFM, with passive intake grilles at the bottom of the box. When i run the HPS and fan temps still blow past 100F.
from what i read for proper ventilation you need the fans to replace 3-4x more than the total cubic space in less than 5 minutes. My total cubic feet = 40 cubic feet. So ideally i would want a fan rated at about 120-160. I thought the 465 CFM blower I had would suffice.
can anyone tell me something im not doing right or what im doing wrong?Cicatriz Reviewed by Cicatriz on . Heat Problems with 250 HpS Hi everyone been doing alot of reading but ive still run into some problems. Ive constructed my first grow box that measures 2x4x5. I have my sun system V in there which is 250 HPS bulb + ballast. For my exhaust i have a dayton blower rated at 465 CFM, with passive intake grilles at the bottom of the box. When i run the HPS and fan temps still blow past 100F. from what i read for proper ventilation you need the fans to replace 3-4x more than the total cubic space in less than 5 minutes. My Rating: 5
-
07-10-2006, 01:41 PM #2Senior Member
Heat Problems with 250 HpS
where is the thermometer placed? if it's in the dierct light then the reading will be a false high reading. put the thermo at about the level of the canopy and shade it with a peice of cardboard or something. 465 cfm should keep the temp in that size cab the same as the ambient temp of the room the intakes are in. i had a 2x2x2.5 aprox. cab with 150hps and 120cfl with a 180cfm ehaust ant 4inch duct fan for intake and the temps always were the same inside and outside the cab. that means that the air didn't have enough time to heat up before it was exhausted. remember the temp can never go lower than the temp of the air being drawn in (intakes) unless you are using an airconditioner. so if its 90degrees in your house in july then the lowest you grow ttemp could possibly be is 90 degrees(probably a bit hotter) good luck!
-
07-10-2006, 06:44 PM #3Senior Member
Heat Problems with 250 HpS
Yah, what he said. Also, what are the temps in the room? Overall you shouldn't have any real problems with that size fan unless you live in TX and don't have AC.
Justaseed you are my SCROGGING Hero. Have you decided if your going to go hydro on your next gro when you get off...? If so, what system?
Adieu\"If what shone afar so grand,
Turn to nothing in thy hand,
On again; the virtue lies
In struggle, not the prize.\"--R. M. Milnes.
Hugh Miller said the only school in which he was properly taught
was \"that world-wide school in which toil and hardship are the
severe but noble teachers.\"
-
07-10-2006, 07:44 PM #4OPJunior Member
Heat Problems with 250 HpS
Justaseed -- three words: SOFA KING GOOD....thats you man...im going to do a dry run of my cab and shield my temp probes and see what real temps im running.
bluebear -- ambient rooms temps are max 83 during the day and 72 at night.
any other comments/input welcome
Advertisements
Similar Threads
-
heat problems
By SoHigh420 in forum Plant ProblemsReplies: 2Last Post: 07-19-2010, 05:37 PM -
Heat Problems
By dejayou30 in forum Plant ProblemsReplies: 6Last Post: 02-14-2008, 06:28 AM -
HELP: Heat and humidity problems...
By k-biz in forum Closet / Cabinet GrowingReplies: 3Last Post: 11-27-2007, 06:17 AM -
Heat problems
By Mnoutdoorz in forum Closet / Cabinet GrowingReplies: 3Last Post: 07-01-2006, 04:25 AM -
Atic Heat problems
By Smoking Chef in forum Indoor GrowingReplies: 9Last Post: 06-26-2006, 03:41 PM