Quote Originally Posted by hondo
So,Pigsnout, It sounds like you are running them basicly like an flood and drain set up, but you are constantly flooding right?The fill pump is always on?
Until the pumps go off with the lights.
PigSnout Reviewed by PigSnout on . How to recirculate a 4 bucket waterfarm system with a res and controller? I was told the feed hose should be a smaller diameter than the drain hose. 1/2" flexible tubing connected to the bottom of each bucket for draining. Already in place. The stand alone res of the waterfarm has a 1/2" hole at the bottom. I am going to put a water pump inside to push the water out. Then use a diameter changing adapter on the outside and either flexible 1/4" or 3/8" for a feed tube. I'm going to drill a hole 2/3 of the way up on each lower bucket for the feed line. Not done Rating: 5