The pic seen in the June 10 th post is the same plant as the female in flower
PigSnout Reviewed by PigSnout on . How to recirculate a 4 bucket waterfarm system with a res and controller? I was told the feed hose should be a smaller diameter than the drain hose. 1/2" flexible tubing connected to the bottom of each bucket for draining. Already in place. The stand alone res of the waterfarm has a 1/2" hole at the bottom. I am going to put a water pump inside to push the water out. Then use a diameter changing adapter on the outside and either flexible 1/4" or 3/8" for a feed tube. I'm going to drill a hole 2/3 of the way up on each lower bucket for the feed line. Not done Rating: 5