Does anyone know?...

[L3G10N]

Lowes has some 24" round ones for $15.98. Aluminum.

[GaGrown]

jdog here ya go on the pan! Start by figuring how big of a pan would be ideal for you! Give them some room! Take tape and measure length and width.Keep in mind we already know what the depth is.Go to ya sheet metal,take a straight edge rule like a yard stick,use an awl or 16 penny nail to scribe ya marks on the sheet.Start at the bottom corner and mark a 1/2 inch,then 3 inches.Then the length of your measurment.Put a mark,then go 3 inches and a 1/2 inch.Do the same for the width.And again for the length.You have laid the pan out.Now you gotta cut it out! Using sheet metal shears,cut the 1/2 inch line outlining your pan.Take a pair af red handle snips and cut the corners of the pan to the inside of the 1/2 mark.That half mark is going to be turned flat on a metal break.Take the pan and bend each 3 inch mark to a 90' degree.Pull it out the break and you have yourself a pan!Easy,huh?

Ga Grown!

[Zandor]

Dude you need many of them. Itâ??s worth the drive to civilization to find a big lots. They sell them at Lowes and HD too. You can get plastic for about 3 bucks each.

[stinkyattic]

They are a little less than 2x2x6 feet and are designed for storage of artificial trees. WalMArt sells them at the end of winter.

[GaGrown]

Damn! Zandor,
And I wanted to see his pan he was gonna build! LOL! Kiddin'! j dog! I can make any custom pan! It can be done!

[Jdog7000]

I think it would be easier to just buy them.
Thanks guys.

[GaGrown]

I just happen to have access to these materials! It would be easier to buy them! It's just that I'm able to make what you wanna buy!It takes 20 mins to make. Somebody out there is using this information! Just whatever is best for your situation!

Grow On!
Ga Grown