Ok so after taking a closer look at my pictures there are a few things that could seem confusing.
First pictures everything is kind of laying on its side The blue lines will connect to 1.5inch pvc and be glued in place. I found that the pool flex pvc connects right into 1.5 inch adaptors. These will all connect on a line as well.
The second pic those to lines at the bottom are my input lines. I hard line everthing so the to nipple will be connected.
The third pictures shows the inside of the bucket the round thing at the bottom in soaker hose and is not connected to the pump line just all black.
Mylar is half up and the floor is getting painted and the buckets will be raised on blocks..

any tip or advice would be helpfull.