Activity Stream
227,828 MEMBERS
1620 ONLINE
greengrassforums On YouTube Subscribe to our Newsletter greengrassforums On Twitter greengrassforums On Facebook greengrassforums On Google+
banner1

Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1.     
    #1
    Member

    Co2 Injection During Flowering

    Is Co2 injection just as important during flowering as it is during veg?
    rzaodb6 Reviewed by rzaodb6 on . Co2 Injection During Flowering Is Co2 injection just as important during flowering as it is during veg? Rating: 5

  2.   Advertisements

  3.     
    #2
    Senior Member

    Co2 Injection During Flowering

    My understanding is that it is not very important during veg, but extremely important during flower.

    Never tried it, but I want to.

  4.     
    #3
    Senior Member

    Co2 Injection During Flowering

    No C02 for veg only when flowering ans only when the lights are on.Oh and they must be MH or HPS, won't work with fluro's. Wish I had it to use also. Also not in a house where people live, it can flood all oxy out and drowned you.

  5.     
    #4
    Senior Member

    Co2 Injection During Flowering

    If you use enhanced CO² during veg & flower your plants will grower quicker and grow larger. I like to run my CO² generator in veg & flower cycle. Starting with day one of veg from clone and all the way to the last day of harvest.

    Hope that helps you decide.

  6.     
    #5
    Senior Member

    Co2 Injection During Flowering

    What level do you try to maintain <ppm>, and , what do you control with? I am thinking of getting a controller from BGH that has the photo sensor eye on it so I do not waste CO2 during darkness. I have read it can increase yield by up to 50%, do you find that to be the case? Thanks.


    b0nger
    If you cannot smoke it or eat it, why grow it ?

  7.     
    #6
    Senior Member

    Co2 Injection During Flowering

    Quote Originally Posted by bongerstonerd00d
    What level do you try to maintain <ppm>, and , what do you control with? I am thinking of getting a controller from BGH that has the photo sensor eye on it so I do not waste CO2 during darkness. I have read it can increase yield by up to 50%, do you find that to be the case? Thanks.


    b0nger
    I'm not Z... but...

    I think he runs 1500ppm... or he might go crazy some days and run 1800ppm... not sure... I would go with the 1500 figure.

    As to what controller he uses... I'm not 100% sure, but I know he loooves the C.A.P. controllers. BGH carries them.

    And as to the 50% yield increase... sorry man... no idea there.... it'll definitely INCREASE the yield... but I don't know how much.

  8.     
    #7
    Senior Member

    Co2 Injection During Flowering

    Thanks for the info, I had read 1200-1500 ppm, and to keep fans off for around 4 or so hours, then do a total air exchange.



    later,
    b0nger
    If you cannot smoke it or eat it, why grow it ?

  9.     
    #8
    Member

    Co2 Injection During Flowering

    during flower i run 1800ppm, and maintain 82 degrees, humidity is fifty percenty, plus or minus a couple. on a well set up grow, you can expect about a 25% increase in yield. make sure if you want to use a c02 burner, that you take in to account the amount of heat generated inside your room. so upsize your ac accordingly.:stoned:

  10.     
    #9
    Senior Member

    Co2 Injection During Flowering

    Quote Originally Posted by bongerstonerd00d
    Thanks for the info, I had read 1200-1500 ppm, and to keep fans off for around 4 or so hours, then do a total air exchange.
    You would definitely want to keep your EXHAUST fans turned OFF during CO2.

    But you need fans inside the grow room MOVING air around... CO2 is heavier than air... and it will drop to the ground.... and your plants grow up... not down...

    As to the 4hour cycle... I don't know if it's the best, but it sounds good!

  11.     
    #10
    Senior Member

    Co2 Injection During Flowering

    Exhaust off, I am going to use a Green Air controller for the CO2 and the exhaust fan. I will have 4 wall mounted oscillating fans to keep the air and C02 moving around hopefully. I do not know where I read the "4 hour air exchange method", Turtle, but I have hand written notes on it, so I know it is legit. Plus I have built my grow room inside of a room basically. It is 8x6x8 and if you farted in there, you could come back 3 days later and smell it. I overkilled it on airtightness (is that a word?). I used blue board, plastic (2 layers, plywood, T111, plus I insulated it all on the inside, all wired with its own panel box and receptables, yada yada yada. My day job is a mechanical engineer, so I am a dickhead when it comes to detail I guess. And, I only do shit the right way, which should work to my advantage in this hobby. I hope Zandor can offer some insight to us also.

    peace bro,
    b0nger

    P.S. And I was not lying when I said I never grew before. This will be my first grow after I get my room/cabinet/palace done. I'll show y'all soon what it looks like. Ole lady has a camera, but all I can take pik's of is my thumb. I am photo challenged I think.......lol
    If you cannot smoke it or eat it, why grow it ?

Page 1 of 2 12 LastLast

Similar Threads

  1. question about co2 injection
    By ben350n in forum Advanced Techniques
    Replies: 3
    Last Post: 10-24-2008, 03:38 PM
  2. direct c02 injection for hydroponics
    By jondoe67 in forum Growing Information
    Replies: 4
    Last Post: 04-15-2008, 04:02 AM
  3. An injection of love
    By weedmaster in forum GreenGrassForums Lounge
    Replies: 31
    Last Post: 08-26-2007, 09:08 PM
  4. direct o2 injection
    By thedirtysouth in forum Indoor Growing
    Replies: 3
    Last Post: 03-09-2006, 05:01 PM
  5. CO2 injection kit test
    By rzaodb6 in forum Hydroponics
    Replies: 4
    Last Post: 01-26-2006, 03:37 PM
Amount:

Enter a message for the receiver:
BE SOCIAL
GreenGrassForums On Facebook