Activity Stream
227,828 MEMBERS
12497 ONLINE
greengrassforums On YouTube Subscribe to our Newsletter greengrassforums On Twitter greengrassforums On Facebook greengrassforums On Google+
banner1

Results 1 to 5 of 5
  1.     
    #1
    Senior Member

    Please help me fix my box

    I have a box 5 feet high with a 600 watt hps. Help me out please. Does this box look like a good design?
    Kronz Reviewed by Kronz on . Please help me fix my box I have a box 5 feet high with a 600 watt hps. Help me out please. Does this box look like a good design? Rating: 5
    FOR MEDICAL USE ONLY
    IN COMPLIANCE WITH H&S CODE 11362.5
    IN ACCORDANCE WITH PROP 215

  2.   Advertisements

  3.     
    #2
    Member

    Please help me fix my box

    hi kronz

    i was in the same situation as u, ive got a grow tent 1 1/2 feet taller than yours and all i done was cut a 6 inch holee in the side of the grow tent and put a piece of 6 inch ductin through it,i also put a few bends in the ductin to stop the light comin through in the dark period cos light cant travel round corners for my intake of cold air and a 6 inch system air fan pulling the hot air from inside the grow tent.

    this is just my 2 cents hope it helps

  4.     
    #3
    Senior Member

    Please help me fix my box

    fire. see my thread and worries aswell




    http://boards.cannabis.com/showthrea...946#post711946

  5.     
    #4
    Senior Member

    Please help me fix my box

    I have ducting from my light to the fan and from the fan to the hole leading out of the box. I have two small holes on the opposite side and i am wondering if i should put fart fans there or something? and how do i keep my box cool ? is there any special method ?
    FOR MEDICAL USE ONLY
    IN COMPLIANCE WITH H&S CODE 11362.5
    IN ACCORDANCE WITH PROP 215

  6.     
    #5
    Senior Member

    Please help me fix my box

    If you are sucking air out of the BOX... air will come in through cracks and small holes... No need to PUSH air into the box...

    There may be a reason to drill some holes in your box if it is air tight!!

    With one exception... if you added another - 1000 watt light into that box you would be smart to push/pull air into the box as well as pull it out.

    : )

Amount:

Enter a message for the receiver:
BE SOCIAL
GreenGrassForums On Facebook