Quote Originally Posted by BloodyRedBarron
Use Quick Fix 4.0

I have done 3 test on the QF 4.0 and passed all 3.
1. was a home test kit (passed)
2. I sent the sample to the test kits lab.(Passed)
3. Took a pre employment SAP 5-50 W/NIT Test. (Passed)

I also saved the empty bottles for Temp.Testing.
Heres what I did and my results.
First I filled the QF bottle with cold tap water then took the heating pad and taped it to the side of the bottle without the temp. strip.
Put it under my nuts and in about 1 hour it was @ 92 degrees.As time went on the heating pad made it warmer till it peaked at 98-100 degrees.
It held this temp for 10 hours.*Note: The heating pads get to peak temp in 2-3 hours.
OK I got some home tests, Xalex pot test. I'm an idiot, I have no clue how to use it. It came with no instructions. there are 9 little holes at the top, then a 1" window slot and a real small one at the bottom. the 1" slot has a C and a T next to it and the small one has an S below it. I dropped some sample in the 9 holes and it dripped down into the 1" slot. It's been 5 minutes and it shows nothing. What I'm I doing wrong? Please help