yellowing leaves, crispy edges

[mountainman]

Is this nute burn? I think it's what it is, I'm bringing the ms down to try and fix it. It's still growing full speed ahead. Thoughts? Suggestions?

Using Fox Farm Growbig, Tigerbloom, and Earth Juice Catalyst. ms topped 2.0 when problems started, replaced it with 1.6, now bringing it down to just under 1.5.

mountainman Reviewed by mountainman on 03-23-2006. yellowing leaves, crispy edges Is this nute burn? I think it's what it is, I'm bringing the ms down to try and fix it. It's still growing full speed ahead. Thoughts? Suggestions? Using Fox Farm Growbig, Tigerbloom, and Earth Juice Catalyst. ms topped 2.0 when problems started, replaced it with 1.6, now bringing it down to just under 1.5. Rating: 5

[mountainman]

Oh, also, as you can see, about two weeks into flowering.

[karmaxul]

Thats nute burn my friend. Flush flush flush

[mountainman]

Thats nute burn my friend. Flush flush flush

Thank you thank you Karmaxul.

[mountainman]

Ok, so I've had nute problems twice now, and the solution before was also a flush. Would it be good to do a flush every two weeks or so?

[karmaxul]

Cut your tds down by 90%. Not only will your plants be happy but your pockets will be fatter. 1400ppm is a bit high in my opinion I use 100ppm. 1 EC = 700ppm

[mountainman]

So you mean keep it down under 1.00 ms?

[karmaxul]

Not sure what ms is? There is parts per millionth or ppm
E.C, or electrical conductivity
mS or us which is microseimen.
1 us = .5ppm
700ppm = 1 E.C.
Measuring in us is most acurate.

[mountainman]

Not sure what ms is? There is parts per millionth or ppm
E.C, or electrical conductivity
mS or us which is microseimen.
1 us = .5ppm
700ppm = 1 E.C.
Measuring in us is most acurate.

Right, it's mS, or us. So I'm sticking it in a roughly .94 mS tonight after flush, does that sound good?