There IS a way to make a joint look like a cigarette. It takes a person who is VERY good at rolling joints and if anyone knows the smell of marijuana, you're screwed anyways. Well, here we go.

First, hold the cigaratte at the base of the filter, and roll the cigarette between your thumb and index finger, applying a little pressure. After about two minutes, you'll see the filter has come out just enough to be able to pull it out. Put a roach or a small non-thc filter where the old filter was. These items can be found at weedcity.com or your local smokeshop. The next step is to cut the cigarette with a razorblade about 1 cm from the filter. Take a piece of rolling paper and put the tampered filter at one end. Roll as usual, being very careful to not rip or in any way damage the cigarette filter. If more than one paper is needed, rap another paper around the other. Rip off the gummed part of another paper and use it to secure the filter to the joint.

This is very hard to do, and will undoubtedly take practice. But it can be done, and looks like a cigarette from about 25 ft. away, which is all you would need if smoking in a public area. However, if someone knows the smell of marijuana, this technique is rendered useless. Personally, I do not think it is worth the effort, but if this is what you need, then go for it.
graph Reviewed by graph on . ok heres the deal im 16 and cant smoke at my house (my moms home all the time) so i was woundering if thers any good ways to A.find a good place to smoke B. a way to make a joint look like a cig orsomthing so i could just stand down wind from people and light up Rating: 5