Results 11 to 20 of 57
-
03-05-2006, 04:05 AM #11Junior Member
First Grow - start to finish
nice looking setup, post some stats about it, couldnt tell what type of light that was but if it is HID your going to run into some heat issues, those type of hoods arent to good for small enclosures, i run a super sun 2 air cooled by sunlight supply and i hooked my exhaust up to it and i can actually stick my hand inside the hood enclosure and its not even hot inside,
also have you looked into mylar? you may run into hot spots with the aluminum foil i also found a report on another board where test were done with a light meter against mylar, aluminum foil, and white paint and beleive it or not your better off with white paint than aluminum foil, look up mylar on ebay you can get very cheap
not trien to pick you apart but beleive me its all love man, i dont wanna see ya make mistakes i have, its def no fun to veg a plant for 3 weeks to wake up to it bent over burnt to a crisp
also please post some dimension, do you just plan on growing one plant? you can def utilize more of that space you got
-
03-07-2006, 04:38 PM #12OPMember
First Grow - start to finish
I'm using a EZ hydrokit bought on e-Bay for $150.00. The bulb is a 125W reb and blue spectrum bulb that turns inside of the housing to point the spectrum you want down towards the plant.
I used foil because it was what I had availible and so far after testing for about three days the room never exceeded 80 Degrees. Usually depending on day or night the rooms temp is averaged out to be 76 Degrees. The buld is great for small spaces that is why I went with this dual spectrum bulb.
I might utilitze the space with 2 additional plants. I figured I might run into problems with only having one plant. The likellyhood of having a female is very low if I only grow one plant. I figured if the plants growing in soil were female and the plant growing hyroponically was male I would get rid of it and transplant one of the females to hydro for the flowering process. The room is 4 X 2 X 6.
-
03-07-2006, 04:53 PM #13Senior Member
First Grow - start to finish
Nice bulb...but why not get a MH or a HPS? a 1000 watt w/ hood costs 150 on ebay. .
But yeah thats a great veg bulb[COLOR=\"DarkGreen\"][SIZE=\"3\"]What dosent kill you makes you stronger
The Jackass learns from his own mistakes and the wise man learns from others[/SIZE][/COLOR]
-
03-08-2006, 02:20 PM #14Junior Member
First Grow - start to finish
that light is perfect for veg however i would look into a hps for flower or you will be flowering for like 3 months just to get itty bitty buds, if you only plan on keeping it a small setup you can pick up an 150watt hps setup for like 50-100 bucks just look around, also keep your eye out for a mh, nothing beats a mh/hps combo
and another thing about your setup, if you plan on switching a soil grown plant to hydro you must fully rinse the roots cause soil has bacteria that will contaminate your resivior, is there any way you can cut a few holes in your current setup to accomodate more plants? your hydro will def outgrow your soil so you will always have one dragging behind, plus you dont want to pull up roots after you have determined sex you will most definatley shock your lady, maybe into hermie or wors death, by the time she's flowering she'll have a fully developed root system
also dude you can grow way more in your setup my room is only 3x2x8 and i grow 4 plants
keep postin your progress
-
03-09-2006, 01:36 AM #15OPMember
First Grow - start to finish
In all honesty this ia more of an experimental first grow. I'm reading the books and taking my time to learn this art solo (w/ all of your valued help of -course ;o().
I'm hoping to have a lady sprout the first time. While luck has a lot to do with it; weighing your concerns has put my mind into a state of re-thinking. Maybe I should try this solo plant first to get the skill set down.
BTW: I have read that you can transfer a soil plant to a hydro if your take the proper steps first:
(after pulling the root system free from it's homeot)
1. Use a 5.5ph solution to break away the soil
2. after the soil has been washed away almost completely, transfer the nearly full grown rooting to the bottom of your net pot.
2. Add a generous amount of rocks and water with ph 5.8 until flowering begins.
I think I will try this 2 plant meth. as a fail safe. The room really isn't big enough, with the light that I'm using, to go with more than two plants.
Confusious say, "Small buds are better than none, and two buds are better than one".
CHEERS,
-
03-09-2006, 01:44 AM #16OPMember
First Grow - start to finish
Hey,
I just thought:
BRAIN FART!
If any of the first three are females, I will just clone them for an optimum second harvest. No transplant is ness! Although it would be a great experiment!
CHEERS,
-
03-12-2006, 05:06 AM #17OPMember
First Grow - start to finish
I checked the WR seeds today and 2 of four are starting to crack. Prob. two more days until I can transplant to rock-wool inside the grow room.
I read that the seeds should be placed with the white root facing down just below the top of the rock-wool. After initially placing the seed on top of the rock wool you should water well for a week with the 5.8 ph solution.
Am I going in the right direction?
-
03-16-2006, 11:15 PM #18Senior Member
First Grow - start to finish
yeah. You've got the right idea with the rockwool...just make sure to soak it first and get the pH at the optimum level. Also, as to a reflective material, you can buy space blankets at any sporting goods store pretty cheap. They are made from mylar, but they just come in 5'x8' rectangles. Look in the camping section.
As to cracking the seeds, you can pre crack them if you are very careful, or an easier method is to just notch a small chip into them so the water can penetrate the shell and the seedling will start to expand. I had some old bagseeds for my first grow...I placed them into warm water to start until they sank, then into a moist warm tissue surrounded by tin foil for a day and a half(by heater). i think 75 percent of them cracked at that point, the other few i left in the tissue and all but one cracked in the next day.
good luck :thumbsup:
-
04-10-2006, 11:00 PM #19OPMember
First Grow - start to finish
I don't know everybody...... It has been an un-godly amount of time and the seeds did not germ. I have officially moved onto plan B. I cut a 2" square of rockwool and soaked it in 5.5 for about 5 hours. I then placed 2 seeds about 1/2" below the surface.
The room is at 80 deg. and is fully lit. I assumed the lighting wouldn't matter because the rockwoll eliminates about 90% of light penetration. I will keep everyone up on any changes. The posts may be speratic, but nothing has happened. Once the grow actually starts, I will update about every other day. This is officially Day 7 since I have placed the seeds in the rockwool. We shall C!
-
04-13-2006, 12:11 AM #20Junior Member
First Grow - start to finish
what are those two things on the sides? Humidifiers?
Advertisements
Similar Threads
-
Photo Grow Journal - "The Producer" Grow Cabinet - Start To Finish
By GrowerXLT in forum Indoor GrowingReplies: 109Last Post: 04-22-2009, 11:43 PM -
First REAL grow, cfl's start to finish, bagseed
By SantaClawz in forum Grow LogReplies: 54Last Post: 03-18-2008, 05:28 AM -
Hydro cabinet grow start to finish
By Passage to Indica in forum Closet / Cabinet GrowingReplies: 46Last Post: 04-08-2007, 03:30 AM -
AK-47 SCROG SOG Grow, How long from start to finish?
By ullnug in forum Indoor GrowingReplies: 3Last Post: 10-03-2006, 12:51 PM -
is it possible to grow start to finish with a 600w hps
By magic bud in forum Basic GrowingReplies: 8Last Post: 03-13-2005, 08:56 PM