Im looking to build a copy of the 'mini caddy' from sunlightsheds..
http://sunlightsheds.com/mini_caddy.htm
Dimensions: 36" tall x 31" wide x 20" deep

this is a first grow btw so I wanted to keep it somewhat smaller...

originally I was going to purchase something like this off ebay..
http://cgi.ebay.com/Garden-Cabinet-p...QQcmdZViewItem
but I decided to build one myself instead...since it seems all it really is is a cabinet with a exhaust...

I wanted something compact that can fit in...and those c22/c24 cabs look way too big/seem hard relocate if necessary..(didnt

even see the c22/c24 at the store..only online)

so I went to home depot and looked around for the mills pride cabinets for something compact with similar dimensions to the

ebay cab and I came accross this plastic cab which is basically the same size as the sunlightsheds mini caddy model and decided

to duplicate that...

pretty much I want to keep this under $1000.

HYDRO SYSTEM
1. 14 Plant HydroFlora Dual Drip & Ultrasonic Fogging Hydroponic System
http://hydroponicgarden.net/site/990290/product/HF-14 (same as in minicaddy setup)
(ORDERED)

LIGHTING
2. digital ballast w/ daystar AC for the hood w/ ducting to left and right of unit(passive intake on the right, 250cfm inline

fan exhaust on the left) with glass seperating chamber and reflector, so it will be completely independent.

LIGHTPROOFING/ REFLECTIVITY
3. mylar for reflectivity + (weatherstriping for light leaks?) some sort of 90 degree pvc piping(or dryer tubing) on the

intake & for the intake/exhaust of the hood

VENTILATION
4. exhaust- 95cfm can fan exhaust mounted in upper left corner(as opposed to their bathroom fan exhaust) going to a carbon

filter right outside the unit.
intake- 250cfm inline fan intake at lower middle of unit(i guess Ill also add the holes for the wires to pull through... but

should I add those 2 louveur type vents they have too?)

STRAIN
5. AnnaC NYCD seeds(seedbay) with some sort of training....
and maybe some lowrider to fill the void after plants are sexed and males are removed.

TOOLS
6. tools wise... all i would need is something to cut the holes for the fans right? what do I use to secure the fans to the

holes?

CLONING SYSTEM
7. 15 Plant Cloning Chamber w/ 2inch netpots, neoprene plugs, ultrasonic fogger, 3gal reservoir
http://hydroponicgarden.net/site/990290/product/CC-15
(can a small grow like lowryder be used in this when not cloning?
(can be put under hydroflora system & removed for independent cloning)


thanks in advance for any input they may have
btw anyone know any other good sites where I can look up stealth and minigrows like this? og was a great resource.. but

unfotunately its gone =(
xsailbox Reviewed by xsailbox on . need help building copy of "mini caddy" from sunlightsheds.. Im looking to build a copy of the 'mini caddy' from sunlightsheds.. http://sunlightsheds.com/mini_caddy.htm Dimensions: 36" tall x 31" wide x 20" deep this is a first grow btw so I wanted to keep it somewhat smaller... originally I was going to purchase something like this off ebay.. http://cgi.ebay.com/Garden-Cabinet-p...QQcmdZViewItem but I decided to build one myself instead...since it seems all it really is is a cabinet with a exhaust... Rating: 5