CO2 injection kit test

[rzaodb6]

whats up I just set up my co2 injection system and when I tested it I put the hose that comes right out of the gage directly into a cup of water and no bubbles came up. I have the system set to .3cuft/hr and the gage shows that the system is working. Is it not suppose to make bubbles or is there a problem? The system I purchased is the small system from new england hydroponics on ebay.

rzaodb6 Reviewed by rzaodb6 on 01-24-2006. CO2 injection kit test whats up I just set up my co2 injection system and when I tested it I put the hose that comes right out of the gage directly into a cup of water and no bubbles came up. I have the system set to .3cuft/hr and the gage shows that the system is working. Is it not suppose to make bubbles or is there a problem? The system I purchased is the small system from new england hydroponics on ebay. Rating: 5

[Zandor]

I assume you plugged in the cord to open the valve? Those are easy to use first make sure you have CO² coming out of the tank. Next strip it back to the output line right out of the regulator.

There is a small LED light that burns with the power is on.

[rzaodb6]

I dont understand exactly what your saying. I def have it plugged in, the tank is open, and it shows on the valve that gas is moving out at .3cuft/hr. I put the hose line for dispersion into a glass of water and no bubbles came out. Shouldnt the hose have enough power to create bubbles of gas in the cup?

[Zandor]

Yes it should and you should hear it as well. Try turning it up to see if that works. 0.3 is not 3.0

[rzaodb6]

I put my ear up to it an messed with the control valve turning it up and down and def felt the pressure. I really dont know why it doesnt make bubbles cause I can feel the gas coming out on my finger.