Construct a bubler (photo included)

[aparadis]

Ingredients:

1 empty medicine bottle (the orange clear ones are cool)
1 metal spoon
A drill preferably, a knife will do
tape
a bowl (you can get a brass plumbing fixture from the hardware store)
thin tubing (from the hardware store preferable, straws will do)
glue helps
a screen

Simply make a hole in the top of the cap and insert bowl. Glue into place and add tubing so that it nearly touches the bottom when screwed on.

Make a hole on top for the carb.

Tape the spoon to the bottom. This is the handle.

Make a hole near the top and insert tubing so that it runs along the spoon handle, then tape into place.

Insert a screen in your bowl and fill bottle partially with water.

Enjoy.

Let me know if you need additional instructions, and please post your own pics of home-made pieces.

aparadis Reviewed by aparadis on 12-08-2005. Construct a bubler (photo included) Ingredients: 1 empty medicine bottle (the orange clear ones are cool) 1 metal spoon A drill preferably, a knife will do tape a bowl (you can get a brass plumbing fixture from the hardware store) thin tubing (from the hardware store preferable, straws will do) glue helps a screen Rating: 5

[Chucky76]

its just crazy enough to work! ill have to try that sometime...

[Green Screen]

your amazing man.

[Creeper]

lol sweet, Im goin to the hardware store tommorrow after school.

[aparadis]

check out the attachment at the bottom of the first post, its crude, but it works

[kizazz83]

thats sweet,what i did was i took a bottel and tube, cut a whole on the bottum of the tube for the bottel and then on the top i ran a hose to the bottum and put a bowl on the end of the hose. and its a slide style bubler. but im gonna do your thhing right now.

[50BagOfGreens]

tight shit aparadis

[jahjahjahjah]

Thats a great idea.

[Fan o KmK]

i made one, it doesnt work that well cuz theres three holes where air can get in other than through the bowl, one is between teh bowl and the cap, inbetween the pen and the hole in the side, and anotherone between the cap and the tube thing. so basically it didnt work unless i wanted to spend the time to make it airtight which i didnt. so yea, cool idea and it looks sweet but didnt work well for me.

[aparadis]

i made one, it doesnt work that well cuz theres three holes where air can get in other than through the bowl, one is between teh bowl and the cap, inbetween the pen and the hole in the side, and anotherone between the cap and the tube thing. so basically it didnt work unless i wanted to spend the time to make it airtight which i didnt. so yea, cool idea and it looks sweet but didnt work well for me.

Try using a hot glue-gun, super glue, or silicone (out of a tube) to make it airtight.