Activity Stream
227,828 MEMBERS
11383 ONLINE
greengrassforums On YouTube Subscribe to our Newsletter greengrassforums On Twitter greengrassforums On Facebook greengrassforums On Google+
banner1

Results 1 to 5 of 5

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1.     
    #1
    Junior Member

    HPS Heat Dynamics

    For all those experienced with HPS lighting, I would like to know, is there a significant difference in heat output between a 250/270W and a 400/430W HPS light?

    The room is 6.5 ft. long x 7 ft. tall x 3 ft. wide (approx 137 cubic ft.) Would it be sufficient to install a 4" 148 cfm exhaust fan to control heat or would the light need to be air-cooled?

    Thanks for all help.
    QuantumTHC Reviewed by QuantumTHC on . HPS Heat Dynamics For all those experienced with HPS lighting, I would like to know, is there a significant difference in heat output between a 250/270W and a 400/430W HPS light? The room is 6.5 ft. long x 7 ft. tall x 3 ft. wide (approx 137 cubic ft.) Would it be sufficient to install a 4" 148 cfm exhaust fan to control heat or would the light need to be air-cooled? Thanks for all help. Rating: 5

  2.   Advertisements

  3.     
    #2
    Senior Member

    HPS Heat Dynamics

    As long as you have a fan on the plants you should be ok. If memory serves me right with HPS you need the light at least three feet above the plants, I'm sure I'll be corrected if wrong.

    peace

  4.     
    #3
    Senior Member

    HPS Heat Dynamics

    you'll need at least a 243cfm to keep that size area at a moderate temp using a 400wt lamp,and a passive filtered vent opening(about 12x12 on lower opposite wall side of the fan)so that there is free air exchange in between the room and lamp....bonbon

  5.     
    #4
    Junior Member

    HPS Heat Dynamics

    bonbon,
    Thanks for the info. Would the same apply if the lamp is air-cooled? Also could I exhaust both the lamp and room with one 248 cfm inline fan?

    Would a 148 cfm exhaust fan be sufficent if I used a 250/270W HPS?

  6.     
    #5
    Senior Member

    HPS Heat Dynamics

    Do you mean to use a air cooled reflector to exhaust lamp heat and air exchange?you could,but your open reflector will attract dust and airborne particals as well,some of which will be trapped in the foilage and coat the bulb,that will hinder some of the light output and the plants ability to absorb fresh air,I would use seperate fans,one for the hood with the lens on(the lens protects the bulb from dust and contains the heat)the other for air exchange(a 148cfm for each will work fine)

Similar Threads

  1. The dynamics of a male cannabis plant
    By mrmarijuanaman in forum Growing Information
    Replies: 3
    Last Post: 09-19-2011, 12:56 PM
  2. The heat is on
    By gypski in forum Current Events
    Replies: 4
    Last Post: 01-22-2010, 04:25 AM
  3. Heat Wands, heat rods
    By dagshet in forum Marijuana Methods
    Replies: 28
    Last Post: 02-29-2008, 06:32 AM
  4. HELP WITH HEAT PLEASE!!!
    By fsunoles in forum Basic Growing
    Replies: 10
    Last Post: 10-27-2007, 04:48 PM
  5. Heat Help
    By HungryMcNasty in forum Indoor Growing
    Replies: 2
    Last Post: 04-03-2006, 05:49 PM
Amount:

Enter a message for the receiver:
BE SOCIAL
GreenGrassForums On Facebook