Hey Red, I am a newbie too but I have just finished reading 2 books and hundreds of posts on this site. I just love sucking in as much knowledge as possible. First off I am sure everyone will tell you not to use a regular light. They just dont produce enough lumens and they also create way too much heat. Buy a couple of 42W Compact Fluoro's they create about 2600 lumens each if you are going to use something cheap. They cost about $8 each. Now as far as ventilation I did the same thing with a box but I found that since the heat and light were trapped in the box the temp would go up to about 90. This is with an oscillating fan on them directly. I then put silver dollar sized holes (4 per side of box) and had a drop in temp of ~7 degrees to 83. I dont know if that is the answer you are looking for. I am just trying to help.
BagOnics Reviewed by BagOnics on . Newbie needing help! ok i have germinated the seeds and everything did fine and the taproot shot out bueatifully and then i put then in a pot and I put the taproot going down and the seed going up towards the light and i was wanting to know if that was the right way of doing that? And second I was wanting to know if a regular light bulb would work or would i need to put a 150 volt bulb in which one would be better now? I would get some better lights but i dont have the $ right now. And thrid I was wanting to know Rating: 5