"THE SEALED ROOM" 3lbs A LIGHT

[jedeye]

Do you actually raise CO2 levels to 3500 ppm during the last week of the feeding schedule before flushing? This question is based on your posted feeding schedule total ppm. Are the numbers listed in your feeding schedule in ppm? What conc. do you use for all other additives that you mentioned usng?

jedeye Reviewed by jedeye on 02-18-2007. "THE SEALED ROOM" 3lbs A LIGHT THE SEALED ROOM Listen im not very good at writing this stuff down. You can post reply's with any specific questions and I will answer them best I can. My pictures of my room are 1 week from cutting down. Based On A 4 Light Room. Pictures are of a 8 Light Room. I start by sealing my room as best I can. From there I start by building a 8ft by 8ft box with 2x6. Then I screw 2 sheets of OSB 4x8 sheets to the bottom (sort of like a water bed box). I line the inside with polly making Rating: 5

[Tranoble]

I strip then all in one shot on about day 7-10.

Oh shit...that's what I was gonna ask ya...almost forgot.
Buddy keeps his plants at 8" spacing on center and keeps up with the pruning about every other day on them and is done any pruning as well by day10 of 12/12.
Do you prune at all prior to day10?...or just go in and rape'em all in one shot around day10? Was just curious about that.

[Tranoble]

I couldnt really tell ya. I start off with about 25 gallons for 14 lights then it increases as the plants mature. I only give my plants enough water so they need another watering when my lights come on the next day. Hope this helps.

How much volume of water do you use per 8' x 8' bed during each watering? Does this amount increase as plants mature? What is demensions of sealed room in height x width x length in feet? How many btus does your AC use and how many sqare feet is it rated for?

[Tranoble]

The highest my Co2 evar gets is 2200 ppm and thats only if they look like they can handle it. My Co2 is turned off for the last 2 weeks. The numbers in my feeding schedual are listed in ml's. LOL. For additives just stick to what the directions on the container say.

Do you actually raise CO2 levels to 3500 ppm during the last week of the feeding schedule before flushing? This question is based on your posted feeding schedule total ppm. Are the numbers listed in your feeding schedule in ppm? What conc. do you use for all other additives that you mentioned usng?

[noruas]

For what it's worth, to all CO2 Generator Piolet Light users, or would be users:


I have absolutely no troubble with my CO2 Generator, w/ Piolet light. It's in the middle of my grow room. The Light it gives off is very minimal, and no plants are showing any problems. Also, there is no negative effects associated with slightly higher CO2 levels during lights off. The piolet burner raises my PPM by about 100 above ambient air... so lights off CO2 ppm is around 500+/- ....


no problems at all, and I must say... CO2 kicks ass!!
never had such thick stems and rapid veg growth...
:rastasmoke:

[DB2004]

The PF2 is GARBAGE and does not work. I used to work for the company that made them. They have no power factor correcting ability, they're snake oil. IP Controls went out of business, the products were unreliable. I got fired for refusing to build them. I can answer any questions you may have on Flip Boxes, Timer Boards, Load Centers, etc......

Best Regards

DB

[jedeye]

Was wondering the price you paid for your AC unt and what cooling capacity it has. Any leads on where to find the one you used?

[Tranoble]

If you have no problem running lots of water and want to go cheap you can purchase a Chiller. they have 1 fan, 2fan and 3 fan maybe even 4 fan im not sure. I little bit more money and alot more power you can purchase a Thermoplus A/C they start at 1 ton and go up from there. Basicly 1 ton will cool about 3 1000w lights. If you want to spend even a little more money you can go with a A/C Heating and Cooling unit. These units have a condencer that sits out side and run gas to the A/C unit that sits in your room. They use alot of power but no water. You can do a search or ask your local hydro store about any of these and im sure you will find where to purchase them.

Was wondering the price you paid for your AC unt and what cooling capacity it has. Any leads on where to find the one you used?

[Tranoble]

Wow you use a pilot light burner in a sealed room and it doesnt raise you PPM of Co2 in your room when your lights are off. First i heard of that.

For what it's worth, to all CO2 Generator Piolet Light users, or would be users:


I have absolutely no troubble with my CO2 Generator, w/ Piolet light. It's in the middle of my grow room. The Light it gives off is very minimal, and no plants are showing any problems. Also, there is no negative effects associated with slightly higher CO2 levels during lights off. The piolet burner raises my PPM by about 100 above ambient air... so lights off CO2 ppm is around 500+/- ....


no problems at all, and I must say... CO2 kicks ass!!
never had such thick stems and rapid veg growth...
:rastasmoke:

[rollin500]

this thread is inspiring and very helpful, i've reciently gotten into the scene with some equipent I ordered from BC, i'm doing 20 clones per 1k hps and 3 in the flowering room, so 3k and 60 little guy's under 12/12 how do u think they'll do WITHOUT CO2? what am i looking at to set it up? And how bad do u think it will stink, should I invest in a charcohol setup?