Results 1 to 10 of 35
Threaded View
-
07-03-2005, 01:04 AM #14
OPSenior Member
Donkey Dicks
I built my growroom using 3/4" PVC and draped the frame with panda plastic (black on the outside, white on the inside. Am going to add a roll of mylar down lower to cover the bottom of the plants better. I used a half a sheet of 1/2" plywood for the floor -- I strategically placed extra PVC under the floor for extra support. The room is about 4x4x7 1/2. I grew 3 large plants in there with room for another. So far your into it for about $50.00 bucks, depending on if you can salvage some board for the floor.
Originally Posted by Oli
I used two 5' pieces of dog chain (about $5 for chains and hooks) and some 's' hooks to hang the lights from (that was the only expensive part--the lights that is)
I mounted (ingeniously I might add) a 100 CFM bathroom fan (you can get a fan for about $13 -- I spent more on a good one like $50.00) to continuosly vent the room -- the plastic wasn't secured at the bottom, plus the front flap seemed to provide adequate air intake.
Finally, I took a house fan we already had and stuck it in there -- blowing whever the light was on. I just upgraded to a standing fan, with random variable speeds ($40.00). I like the 2 and a half foot vertical flow it puts out.
If you go with cheap fans, you can do the room for under $100 easy. Use any extra plastic to make a liner for the floor. Tape it to each corner -- in case of spills.
Similar Threads
-
Cannabis festival at Dicks sporting goods park
By denverbear in forum Colorado (CO)Replies: 0Last Post: 08-17-2010, 04:43 AM -
Donkey Dicks
By bucknuts1870 in forum GreenGrassForums LoungeReplies: 7Last Post: 01-12-2007, 07:04 AM -
are my chicks growing dicks or just funky mutant
By starmark in forum Plant ProblemsReplies: 5Last Post: 09-08-2006, 03:49 PM -
wtf is goin on here with all these dicks?
By chisme in forum GreenGrassForums LoungeReplies: 10Last Post: 05-01-2006, 05:57 PM -
Not All Cops Are Assholes...Some Are Just Dicks, =)
By Gothen in forum GreenGrassForums LoungeReplies: 3Last Post: 07-17-2005, 02:46 PM










Register To Reply
Staff Online