I don't know if you can afford one buy you should look at cool tubs. You would need to add the second light bulb socket but it's not that hard. They are 20" long so it will fit one light bulb at each end. They should not touching each other and still have room in between. You will need a good blower to move the air through the tub but that is you very best way to go. imo.

You can get them from eBay or from http://www.insidesun.com/index.php?a...=3&prevstart=0

You can make your own too with a Bake-A-Round from eBay. They are only 4" round but that fits HPS lights. A few 4" vent parts and some foil tape is all you need.
Zandor Reviewed by Zandor on . want to use a street light there is a street light in my back yard that was installed by previous owners,my questions are, all street lights same wattage? i presently have a 250 hps from insidesun,if this light happens to be of bigger wattage what do you recommend i do? i want to take the ballast and bulb out of the 250 hps and replace it with the street lights ballast and bulb.and if it is not of a higher wattage than will it benefit me to add it with the 250 hps,and is there a tutorial to convert the street light over Rating: 5