Lightbulb Vapouriser

[3 Sheets To The Wind]

Hi, I can't find the thread, but has anyone got any solutions to making the lightbulb vaporizer (sp?) and if so thanx

3 Sheets To The Wind Reviewed by 3 Sheets To The Wind on 06-13-2005. Lightbulb Vapouriser Hi, I can't find the thread, but has anyone got any solutions to making the lightbulb vaporizer (sp?) and if so thanx Rating: 5

[Drugman Joe]

You pretty much just need an end cap and a mouthpeice of some sort. Maybe a rubber end over the bulbs end with a hole in it big enough for a small glass tube. Heat the herb with lighter and voila.

[3 Sheets To The Wind]

Thanx, I'll try it next time I get sum green

[Jimmicrackedcorn]

Get a clear 80-100 Watt screw lightbulb, cut the metal bit off and file the edges down so its relatively flat, get a plastic screw top like u get on pop bottles, burn 2 holes in it big enuff to fit a drinking straw (though you are warned that it is safer to use a glass straw) either fit both holes with a straw (one for inhaling the other as a rush hole) or just fit the straw in the hole acting as the mouthpiece. You need to seal all possible air gaps, some people say duct tape, but blu tac wrapped around, and pressed into the gaps where the straw joins to the plastic top, and top to the lightbulb works soundly and is pretty easy to peel off to put more weed in. Thats it

[Jimmicrackedcorn]

Oh and remember to test for airtightness before u first try smoking out of it, I was battered and overlooked this and didn't get a very good hit the first time I tried it.

[3 Sheets To The Wind]

cool thanks, might me getting some weed tomorrow and if i do, i'll try your method of making the vap. cheers!

[jonny]

The higher the wattage the bulb is, the stronger the glass will be, so no 40 watts!! try get hold of 100+ if possible.

Also, when you see a lil steam its ok, buit dont let it actuallly make smoke!

1 last thing, make sure you get a clear glass bulb and not a frosted or "pearl white" one.

Jonny

[codunc]

make sure you get a clear glass bulb and not a frosted or "pearl white" one.

If you can only get ahold of a frosted bulb, just take alcohol or water with salt in it and pour some in the bulb and shake it around it'll take the powder out

[mono repin]

I built one last night. Used the top portion of a bottle to make the cap screw on nicely. I sealed it to the bulb with hot glue, which is air tight, and seems to be holding up so far. I got sorta high last night, I can't help but think my technique is a bit off. About to try it again. I'll let you know how it goes.

[mono repin]

Alright my technique was WAY off yesterday. Wasn't leting the weed cook near long enough. I burnt a little, but way better than the weak ass hits I took last night. Also I was putting to much in at one time, and not breaking it up well enough. Anyways, the glue is still holding up, and I'm really stoned, so I'm pretty happy with my vaporizer. BTW, I named it "Jesus."