Results 11 to 20 of 56
-
02-28-2013, 12:39 AM #11OPSenior Member
Anyone wanna see a specific x vs x?
Today's work...
-
02-28-2013, 12:45 AM #12OPSenior Member
Anyone wanna see a specific x vs x?
So that's where were at, like I said the end with the vanity will be a work area(to keep heat signifies away from basement wall) for germination clones prep and equiptment etc... the space to the left of it roughly 12'x8' is gonna be split for a veg room and a flower room.. we are getting there!!! The new seeds are supposed to arrive tomorrow! I'm hoping to have this done by the weekend germinate over the weekend and set up this grow for the long term on Mon mourning!!! Wooooohooooooo!! Lol ENJOY!! input anyone!? Questions!? I don't think I've had a single follower!? Kinda disappointing:wtf:
-
03-01-2013, 07:06 PM #13OPSenior Member
Anyone wanna see a specific x vs x?
Ok so wall is all done room is cleaned and prepped for set up doors hung entry door is being turned into hidden secret remote locking door that will look like the wall
beans came in today!! And I have 4 new sprouts along with my girl that just hit its fourth node things are good:-) aside from my chopper problem!!?? Please check out the tread I started titled "someone please help!!" Here's some pics of progress...
-
03-01-2013, 07:11 PM #14OPSenior Member
Anyone wanna see a specific x vs x?
As u can see by the last post my vents have been cut out, ill be doing vent system today... lighting and co2 will be done as well as the scrog tables! Also we will be germinating our new beans
any input!? Anyone!?
-
03-02-2013, 04:29 AM #15OPSenior Member
Anyone wanna see a specific x vs x?
Hung the poly today now I'm having a serious heat problem making the girls curl down toward the ground that I need to adress! Yay!! I hate unstable temps
-
03-04-2013, 07:19 AM #16OPSenior Member
Anyone wanna see a specific x vs x?
So check this out!!!! In two days this plant grew two inches and two leaves, EIGHT branches and TWO FULL NODES on EACH of the EIGHT branches!!!! And the kicker!? Its not even 5" tall!!?? Buuuuuut.. its 6wks old!!! And up until the day before yesterday it was about 6wks old with working on its third set of leaves with no branch growth period nothing but its four first leaves!!!! I was astonished with how small it was for 6wks and how healthy it seemed but ya check of out!! A few posts before this u can see the pic from two days ago to compare
-
03-04-2013, 06:20 PM #17Senior Member
Anyone wanna see a specific x vs x?
I love this thread and your patience with setting up your grow area!
Will continue to Watch your grow room grow! Thank You for keeping this up.
CO(2)? I'll be interested in how you set up your lights, fans and exhaust, etc. Enjoying this thread.
My choice of strains to grow: Delicious NL x blue, should be a good medicine! Your Super Lemon Haze and Liberty Haze x Skunk. Sounds pretty good!, idk.
Which strains are growing?
The grow log is going to be tons of fun!:rasta: pr
-
03-08-2013, 03:49 AM #18OPSenior Member
Anyone wanna see a specific x vs x?
Well right now I have bf tangerine dream, delicious carmello, delicious northern light blue, bf liberty haze all fem seeds and one of each planted one of each sprouted but I don't know if u saw I just posted a plant problem on them as I think my hydro guy sold me soil with spider mites!!! I'm hoping that they pull through they are moving very slow and I've been having an ongoing problem with Ph with the few other older ones, were after a few weeks they are dropping down to acid!! Like 4.0 or less grrrrrr!!! At the moment though I'm managing, and they are all somewhat healthy, healthy enough for me to continue to fix the problems anyways lol... but the room is going well I am almost done with the veg room and finished alot of the flower room today... I'm gonna post pics tonight as I could use some help here as well lol the veg room is perfect other than needing some type of table for under my lights that I can use at will so I can drop plants to floor as they grow, the flower room I'm having a really hard time lightproofing from its neighboring veg room, I finished venting all the cool tubes, trying not to set any red flags with the elec company lol by throwing on 5k watts in lights all one day out of the blue so I'm trying to ease into more n more power... I'm devided the veg flower rooms with black n white, and adhesive zippers so I can roll up the wall if need be, I have the cool tubes on 6 in duct from a chimney I put in so it pulls the 10°f air through the cool tubes and dumps them into the furnace I wanna do negative pressure rooms with just 10x10 vent hole intakes and big box fans for circulationim just having issues with co2 do I wanna run or not, do I wanna time vent or just run continuous right now its just continuous and I can keep temps at 76-78 cosistant with this set up but if I turn off everything and just use fans for internal circulation temps have been getting unmanageable at like 94ish so I'm trying to work the kinks out still that's why I'm contemplating not doing co2 right now with the amount of time I spend in there I've been watching and my co2 has been between 500-800ppm without supplementing so I might jist see how that goes for now but I do want the benefits in yield!!! Ahhhh I don't know what to do lol
-
03-08-2013, 03:59 AM #19OPSenior Member
Anyone wanna see a specific x vs x?
Oh I forgot I have to non fem Satori seeds that have sprouted too say ya that's this run in 2-3mo I'm gonna start vegging the pineapple chunk, and liberty have along with as many clones from this veg as I think I can manage at that point lol... anyone have any suggestions on tape to seal out light from seams of my poly in the flower room, I have some pin holes and some staple holes and light coming in through the zippers and the seams which I need to block I was just gonna use duct tape but I don't know if that's a good idea or not... also I'm in the process of putting up a shelfs in the veg room for all my stuff that's piling up in there lol and one for a cloning station/bench with a chair so I'm comfortable it'll be my smoke spot too lol, I got the scrog tables done too, and half of the white done on the flower side since I had the black facing in on the devider piece, I'm gonna post pics in a few...
-
03-08-2013, 04:07 AM #20OPSenior Member
Anyone wanna see a specific x vs x?
oh and I also plan to start an are for seed production, I don't wanna buy seeds at 12$/ea ever again! Nor do I wanna try to maintain 100strains of clones at all times to keep my favorite strains around lol so ill be using colloidal silver on 1ft clones of all my best phenos beside another of the same or other strains for my hybrids in little sealed plastic greenhouses with filtered intake and exhaust powered by computer fans in the outskirt lighting in the veg room beside the seedling cabinet...:jointsmile:
Advertisements
Similar Threads
-
Specific Med Strains, Specific Uses! Nice list.
By stinkyattic in forum Marijuana StrainsReplies: 139Last Post: 12-17-2013, 08:23 PM -
Specific Gravity
By Mr.NiceGuy11 in forum Drug TestingReplies: 2Last Post: 09-14-2008, 07:55 PM -
Specific gravity
By Yam in forum Drug TestingReplies: 0Last Post: 02-10-2008, 11:25 PM -
Specific Question
By JaiPeur in forum Drug TestingReplies: 3Last Post: 06-09-2006, 02:05 AM -
Specific Med Strains, Specific Uses! Nice list.
By in forum Strains and SeedsReplies: 0Last Post: 01-01-1970, 12:00 AM