Haha.. They'll never keep me (killfrenzi) down. Ill post the harvest pics soon. I just chopped the ladies down yesterday. Took clones yesterday and moved the 6 smaller ones to flower. They are 30" tall and I expect em to get around 5' 5" before harvest. I guess it was a few different posts that took me out. I guess I cant post links to other websites. Thats ok, I learned. Just wanted people to know what I knew... lol.

As for the carbon filter, you'll need: Chicken Wire - 1/4" Holes, A pair of durable pantyhose, 1 x 8" to 6" reducer, 1 x 8" end cap, and 1 x 6" end cap, zip or twist ties. And a roll of duct tape. Oh, and of course some activated carbon or kitty litter crystals.


Form the chicken wire around the 6" end cap, tie together then tape the wire to the cap, slide the pantyhose over the filter leaving it open on top. Next, take the 8" end cap, pantyhose, and chicken wire and do the same thing, cut off about 2" of wire so the 6 is just slightly taller than the 8, after you have the 8" made, place the smaller one inside the 8"er. Once you have the smaller one inside the larger one, add the carbon/crystals around the outside of the 6"er, so the carbon is between the 6 and 8. It should start lookin like a filter by now! Almost done... now, place the reducer over the 2 open ends and the 6" wire should meet up with the 6" opening of the reducer, tape the reducer to the opening and there you have it! You'll want at the very least, 270 CFM to use this filter. The best thing about this filter is: Its reusable, unlike other carbon scrubbers. Just remove the duct tape from the reducer cap, empty the carbon\crystals, and replace with new. Put the cap back on, re-tape and start scrubbin.. lol. Lemme know if you need more info.
ThePinkJina Reviewed by ThePinkJina on . 9 dollar carbon scrubber. This is the simplest and cheapest way to make a carbon scrubber. You can get everything at walmart. For this to work you need an exhaust fan and some dryer duct , or whatever duct will work. Here's the list and prices. 1. Activated carbon in plastic tub. $5.97 2. Knee high panty hose $.39 cent. 3. duct tape $ 2.00 The tools you need are either a soldering iron, a drill , or a screwdriver to poke holes. 281123 This is the carbon to buy. 281124 First you take off the lid and wrap the knee Rating: 5