Attachment 279923Attachment 279924Attachment 279925

There's the pictures, sorry it took so long! The first one is of the leads, as you can see the black lead is the plug connection, you can easily connect the two exposed wires to the ballast. The white lead is the connection for the light. On one end the wires are exposed, allowing me to connect them to the light. The other end has no exposed wires though so therefore I can't connect it to the ballast! This is what I'm confused about... Should I strip the insulator to expose the wires and allow me to connect it to the ballast? The second photo is just of the ballast where you put in the wires, the first two sockets on the left labelled F are where you put the two live wires from the plug connector, and the N on the left is for the neutral wire from the plug connector, and then the LR and LA sockets on the right are where you put the live wires from the light connection and N is the neutral wire again. The third photo is just of the bottom of the light where you put the two live wires in. The first photo is the only real important one.
And to answer your question, none of the connectors are already connected So yeah presumably it's a DIY kit (wasn't told that when buying it though!)

Your help is really appreciated!!
eimsy Reviewed by eimsy on . Need help with connecting the ballast to the reflector/light! Hey, so here's the deal... I just bought a HPS lighting system which wasn't assembled when it came and had no instructions on how to put it together. I think i've managed to figure out how to set up most of it but there's one particular part I'm confused about. There is a lose wire that connects the reflector to the ballast (presumably) and on one end the live and earth wires are exposed, allowing me to connect it to the reflector, but on the other end the live and earth wires aren't exposed Rating: 5