The cabinets are now installed in the corner. I had to move the exhaust ducts to the side because depth is an issue.



Each cabinet has a ball valve installed. The plants will be allowed to soak and then the water will be drained.



There are thermometers with remote probes. Each thermometer has a MIN/MAX function so i can confirm that the thermostats inside are working properly.

I have confirmed that the max temperature in both boxes is about 78 degrees. The cooling works perfectly.

I plan on setting the low thermostat to 18c, which is about 64 degrees. The temperature in our area has gone below freezing but I hope the combination of plants in cabinets + the heating pads will be able to keep the temperature up. If the thermometers report the MIN temperatures are too low, then i will add insulation and/or a small heater.