Results 1 to 9 of 9
Hybrid View
-
09-25-2010, 02:40 AM #1OPJunior Member
honey oil HELP!
so I tried to make honey oil. i used 5x butane. i used 1 oz of leaf. i put it in a glass tube and put 4 cans of the butane through it into a pyrex pan. now all i have is a gloppy mess i don't know what to do with. i can't collect it , well i can with a razor blade but then i have no idea where to put it and most of it is just smearing over the few things i tried to put it on other then the razor blade. please help i'm frustrated as i just used an oz of material and 4 cans of butane with i'm pretty sure i got not even a gram out of it. :*(
karnee Reviewed by karnee on . honey oil HELP! so I tried to make honey oil. i used 5x butane. i used 1 oz of leaf. i put it in a glass tube and put 4 cans of the butane through it into a pyrex pan. now all i have is a gloppy mess i don't know what to do with. i can't collect it , well i can with a razor blade but then i have no idea where to put it and most of it is just smearing over the few things i tried to put it on other then the razor blade. please help i'm frustrated as i just used an oz of material and 4 cans of butane with i'm Rating: 5
-
09-25-2010, 03:07 AM #2Senior Member
honey oil HELP!
It will be anywhere from runny amber liquid to a thick globby ear-wax looking goodness. It doesn't look like much, but WOO HOO!!!!
-
09-25-2010, 05:34 PM #3Senior Member
honey oil HELP!
Honestly, just go to youtube and search for HashBean420's video channel.
That dude is the king. He can be pretty informative if you go through his videos and watch anything related to his oils/budder.
-
09-26-2010, 12:00 AM #4Junior Member
honey oil HELP!
just freeze and put in non stick tin foil or on glass also if you collect and add kief you can make the consistency a bit easier to manipulate also a little bit goes a long way my favorite way to apply and is usually in good portions is to use a pin or sewing needle and break off a frozen piece with it let it sit long enough to stick to the pin then lightly heat it into a bowl of bud or even just ash
-
09-26-2010, 11:33 AM #5Senior Member
honey oil HELP!
Moving backward, you put way too much butane through it. One to two cans would have done it. Check the color of the butane coming out of the column to see when it is time to stop.
Moving forward, if I was looking for something to vaporize, I would place it in a shallow container over low heat ~160F, and let it sit and out gas for awhile longer.
If I wanted to ingest it, I would stick it in a 240/250F hot oil bath and cook it until it was relatively bubble free.
-
09-26-2010, 11:48 AM #6OPJunior Member
honey oil HELP!
i was wanting to use it to make lollipops like you have listed in another thread but am having such problems and feel like i'm waisting so much with not much out of it. when i scrape it, it just smears and/or sticks to everything. thanks so much everyone for all the great info!
-
01-09-2011, 01:19 PM #7Member
honey oil HELP!
Take a small piece of what you've collected and smear it onto a bowl you are about to smoke... smoke it and know you have not wasted your time!
-
01-13-2011, 01:33 PM #8Senior Member
honey oil HELP!
Originally Posted by karnee
Cook off the ethanol in a 250F oil bath and weigh the container with the oil in. Subtract the tare and add the rest of the ingredients.
Put in back in the oil bath and mix. It will then be much easier to handleand you will minimize your losses to the container.
As you note, raw cannabis oil is stiiiiiiiiiiicky and messy.
-
02-17-2011, 05:37 AM #9Junior Member
honey oil HELP!
Originally Posted by karnee
Advertisements
Similar Threads
-
Honey Bud! A Great Way To Utilize Dry Old Buds and Honey.
By Racerx in forum Marijuana MethodsReplies: 3Last Post: 08-08-2006, 12:01 AM -
What does honey oil do?
By 420RoundTheClock in forum ExperiencesReplies: 7Last Post: 07-01-2006, 11:57 PM -
Honey
By Loudogg in forum Marijuana MethodsReplies: 4Last Post: 06-24-2006, 12:46 AM -
Honey Oil
By boy1984 in forum Advanced TechniquesReplies: 6Last Post: 04-07-2006, 11:57 PM